maximus Posted March 14, 2007 Report Share Posted March 14, 2007 Hi guys I get a t*g carrera chrono (A7550 28.8K). Seems to work fine, but I notice a very small flaw-when I reset the chrono the second hand gets little misaligned at zero position (61'). This is not very problematic of course, but as you are surely more expertise than me I think that it could be a way to fix it without the need of opening the watch. Is this true in your experience? Thanks in advance and I apologize if this is a dumb question. Quote Link to comment Share on other sites More sharing options...
rdorman Posted March 14, 2007 Report Share Posted March 14, 2007 Without opening...... run it around until sixty, stop it and don't reset! Quote Link to comment Share on other sites More sharing options...
maximus Posted March 14, 2007 Author Report Share Posted March 14, 2007 Without opening...... run it around until sixty, stop it and don't reset! Oh my Good! I can now see...Thanks master for enlightening the dumbs...That's why you are a VIP member... Quote Link to comment Share on other sites More sharing options...
supermanx Posted March 14, 2007 Report Share Posted March 14, 2007 Oh my Good! I can now see...Thanks master for enlightening the dumbs...That's why you are a VIP member... If its slipping try running it to 45 seconds and reset Run it to 15 seconds and reset to move it the other way. Once you get it where you want do not run the chorno again until you find a watchmaker that will glue the chrono hand on the post for you. Quote Link to comment Share on other sites More sharing options...
maximus Posted March 14, 2007 Author Report Share Posted March 14, 2007 If its slipping try running it to 45 seconds and reset Run it to 15 seconds and reset to move it the other way. Once you get it where you want do not run the chorno again until you find a watchmaker that will glue the chrono hand on the post for you. Thanks a lot for sharing your tip. Is similar to the one provided by the dealer, but yours is more complete. At first it seemed not to work, but with a "full" wind applying your scheme undoubtedly brought the second hand more close to zero position. I will repeat the procedure. That's the kind of advice I was looking for and you are a kind member. Thank you again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.