cskent69 Posted May 14, 2006 Report Share Posted May 14, 2006 The Zigmeister, I have recently acquired a rep Breitling Ti Chrono Avenger. I need to resize the bracelet. Not sure if you are familiar with the band on this watch - but when I unscrew the pins, and get the little screws to come out, I am not sure what to do you next. It does not look like the typical "push the pin out" routine. It might be - I just don't want to break anything cause i see threads, etc. Sorry if this is a dumb question. Any advice? Link to comment Share on other sites More sharing options...
trunk21 Posted May 14, 2006 Report Share Posted May 14, 2006 I don't know if I am allowed to reply here, but I will anyway. You ahve to remove BOTH screws on each link, and then they slide off both pins simultaneously. You cannot take the links apart by removing only one screw per link. Simple as that... Enjoy! Link to comment Share on other sites More sharing options...
cskent69 Posted May 14, 2006 Author Report Share Posted May 14, 2006 I don't know if I am allowed to reply here, but I will anyway. You ahve to remove BOTH screws on each link, and then they slide off both pins simultaneously. You cannot take the links apart by removing only one screw per link. Simple as that... Enjoy! Hey - thanks for the reply. I will give that a shot. In looking at the links - that does not look obvious -Will let you know. Thanks again. Link to comment Share on other sites More sharing options...
irongambit Posted May 18, 2006 Report Share Posted May 18, 2006 Did you ever figure this mystery out? I just got mine today and can't figure out how to get the pin out for the life of me. There's only a screw head on one side...I've tried pushing through the whole with the screw removed. Didn't use too much force, but I wasn't getting it to budge that way. Any help is appreciated. Best Regards, IG Link to comment Share on other sites More sharing options...
cskent69 Posted May 18, 2006 Author Report Share Posted May 18, 2006 Did you ever figure this mystery out? I just got mine today and can't figure out how to get the pin out for the life of me. There's only a screw head on one side...I've tried pushing through the whole with the screw removed. Didn't use too much force, but I wasn't getting it to budge that way. Any help is appreciated. Best Regards, IG The previous post from trunk21 is absolutely correct. You have to take both of the screws out of every link. The "pin" does not actually come out. it is past of that piece of metal (the link). When you unscrew both of the screws in the link - it will all become apparent. Link to comment Share on other sites More sharing options...
irongambit Posted May 19, 2006 Report Share Posted May 19, 2006 oh yeah...that makes perfect sense. Thank you for the clarification. My perception of his post was different and I was still pretty lost. Best Regards, IG Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now