Looking For Recommendations on Quality Tools

[Talipse]

Hello,

I am new to replica watches and RWG. After doing some reading I would like to start working on my own watches. I did a search for "Tools" and was able to find an excellent thread on a "Pin removal" tool from Turtle Creations, I have one on order now.

I would like some recommendations on what and where other quality tools can be purchased. I would also like to know what "basic" tools I will need. I know I will need a case back removal tool, but what kind as there are so many? Screwdriver set but again, what kind? as I have found lots of cheap ones on ebay.

I apologize if this has been covered before but I did not find it when I searched through this forum.

Thanks,

[Guest watchbuff]

Good luck to you. Try here I got alot of stuff from here.

[HauteHippie]

I'll be the first to say avoid cheap knockoff tools from rep dealers and EBay. My suggestion would be to look at the Time Zone Watch School tool kits (http://www.tztoolshop.com/FB_Catalog_TZWS-toolkits.html) for a good starting point. It's mostly Bergeon stuff, which is good. For good screw drivers, I think the Horotec stuff might be a step up, but pricey. The Zigmeisterzumba will probably make some suggestions for you in this thread, and he's one to listen to.