Crystal on Fiddy

[klocklind1]

Can anyone tell me if the crystal on th Fiddy always has to taken out to remove the movement ?

And is the crystal on it fitted in the bezel itself or first pressed in with the gasket directly to the watchcase and then mount the bezel afterwords?

My bezel in NOT pressed to the "bottom", it is a little space on one side!!!!!!!!

[Ztech]

Unless the watch is a screw in case, which the fiddy is not, you don't ever need to remove the x-tal to remove the movement. That's why the caseback is there. You unscrew the caseback to get to the movement from the rear, or bottom, of the watch.

If your bezel is not pressed in completely take a cloth so as not to scratch it and give it a firm press and it should just snap back in. Good luck.