breukelen Posted April 24, 2008 Report Share Posted April 24, 2008 (edited) I disassembled my Arktos 186 to blow a dust particle off of the dial. After reassembling it carefully, I've come to find that after I pull the crown out to adjust the time/date and then only when I push it back in, the dial/movement moves slightly as though it is not firmly seated in place. I suspect that the 3 screws/clips holding the movement/dial assembly in place are not holding it in firmly. I basically reversed the process of the disassembly step by step and it seems odd to me that the whole dial/movement moves a little bit, or that the retainer ring around the movement/dial rotates somewhat, only to be stopped by the inserted crown/stem. My question is, how do I properly reassemble the dial/movement so that it stays put?! Edited April 24, 2008 by breukelen Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now