PAM 000 Please Help

[vlydog]

Since this project has a closed case-back, I am not overly concerned about the movement being accurate. First of all I am not spending any more money to power this rocket and secondly I have two great movements that were both purchased from t.

These are the two movements below; which would you choose?

Movement # 1:

Movement # 2:

Thank you in advance for you opinions!

[Ztech]

The 2nd one. Like you said, it's a closed back. So why waste a nice movement when it will only be covered up?

My 2 cents.

[anton]

I say go with the second movement; I'm not too sure which has better shock protection, but for some reason i feel better with the Incabloc than the Kif on the first.

Additionally, T beautifully finishes his movements.

[vlydog]

I say go with the second movement; I'm not too sure which has better shock protection, but for some reason i feel better with the Incabloc than the Kif on the first.

Additionally, T beautifully finishes his movements.

Here are the specs on the second movement:

SWISS MADE ETA UNITAS

24 cotes de geneve (standard is 9 stripes)

blued steel screws

polished pallet bridge

incabloc anti shock proof

swirls polished ratchet wheel by Dirk Dornbl

[Sweattdogg]

If the price is the same the second one for sure. I really like it. Looks like they have put quite a bit of work into it.

Thanks!

Aaron

[PAMman]

A genuine 000 or 005 has a CdG striped movement if that helps you decide.

Scroll about halfway down this article and there is a comparison pic of the preV, preA and 000 / 005 CdG striped movements. http://www.paneristi.com/archives/PreA_Pan..._A_Panerai.html