alienfromneptune Posted September 2, 2008 Report Posted September 2, 2008 Hey guys, Just got a PAM 252 from Angus a couple days ago. Love the watch absolutely gorgeous. Just one problem. The Crown guard lever seems to be putting way too much pressure on the Crown it self when it is locked down! How can I fix this?
dluddy Posted September 2, 2008 Report Posted September 2, 2008 Could be the tube needs to be cut down to bring the crown a little closer to the case... Got a picture of the CG and Crown?
alienfromneptune Posted September 2, 2008 Author Report Posted September 2, 2008 Could be the tube needs to be cut down to bring the crown a little closer to the case... Got a picture of the CG and Crown? You know I think if I can File the tip of the lever it would take care of the problem. Any ideas on how I can do this!
watchlover321 Posted September 3, 2008 Report Posted September 3, 2008 If you want to file your lever tip, start by taking the CG screws off then you can use a toothpick and a small jewelers hammer to drive the pin out. The rest should be easy... BUT Before you do that, check to see if the crown tube is too far from the case. Pictures would help diagnose what the real problem is.
Logan Posted September 3, 2008 Report Posted September 3, 2008 252's are notorious for shipping with really low grade crown guards, I've no idea why as the rest of the watch is very good. Yours really needs stripping down to see whats going on. It might be as simple as fitting a thinner o-ring under the crown to give a bit more space.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now