tstens Posted April 9, 2009 Report Share Posted April 9, 2009 (edited) Hi all,got my TG Ceramic a week ago.Very nice watch indeed,but with an small issue on the caseback.It is not seated properly to the case,it was quite loose when i tried to tighten it(could screw it with my fingers)did not torque it as it was a risk for not correct engagement in the case.unscrewed it tonight to check it out,it was seated correctly,so i tried to torque it but still, it will not seat against the case (ca 0,1-0,2 mm gap) any ideas on what to do ?the gasket on the inside is not compressed enough to withstand much humidity,so im afraid it will leak more than normal. thanks Terje Edited April 9, 2009 by tstens Quote Link to comment Share on other sites More sharing options...
Guest asim Posted April 10, 2009 Report Share Posted April 10, 2009 i would contact your dealer and see what he says. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.