ALEX.CPA

I like this forum coz its "turd-free". Need I add more?

Oleg Blokhin - Ukrainian coach did wear gold UN Maxi Diver. Sent from my iPad using Tapatalk HD

Thanks Gentelemen. It was long and troublesome project but end result is very pleasing to me. And I did enjoy the process as much as the end result. Now I only need to gold plate H-hand and modify DW to have gold font on black background.

This project has started in 2010 and was finaly completed just in September of 2011. It was coming together slowly but to me it was worth the wait. It started with a very-hard-to-source HBB RG Ceramic Case (not plated ) with crappy 21k A7750 and white DW. V1 RG/PVD Buckle from V1 ultimate RG, 2009 baton style dial and RG hands set (both by V2 maker) came from Mary. Ceramic RG bezel was also replaced with Brushed ceramic bezel from V2 maker. Then brand new movement died while my smith was swapping black DW in. While I was looking for the donor HBB watch (or new movement per se) I snatched one of the last TXcollector's Blue AR Xtals. Finaly I pulled the trigger on ABII Lite from Tony (asian7750) because i needed ABII bezel and also because I wanted 28K A7750 in this RG HBB. I consulted with fellow geeks here and on RWG regarding compatibility of dials/hands between 21K(v2) and 28K (v1/V5) A7750 movements. Got mixed feedback and just took the leap of faith in my smith. He retrofited V2 dial and hands (except H-seconds hand) onto V1 A7750 28 K movement with little problems. Dial feet matched however V1 DW got misalligned a bit with V2 dial so smith also had to swap V2 black DW back into 28K V1 heart. The worst discovery was that V2 H-seconds hand did not fit V1 28K A7750. I sourced a new set of RG hands by V1 maker (thanks Tony), but they do not make H-hand in RG, only in red. This is the biggest "tell" from Dutchy's pieces. I may replace red H-hand with RG one if I source it eventualy from V6 maker. While at it, smith perfomred full movement service and also replaced pvd screws on bridges and rotor with silver counterparts. Last but not least, I have added Mickey's 1) movement stickers (H and 27 Jewels), 2) Ti Bezel screws and 3) Gummy Croc strap. Besides H-hand I will eventualy swap reg 309 RG case-back as this one is def not limited edition. Please judge the final product for yourselves. Sorry for the crappy iphone pics and fingerprints:D . Any comments/suggestions...welcomed Obligatory wristies

47 views and no single opinion? cmon guys...

Me too...BK WM9 is the best but no longer avaialble. MBW from narikaa is second best... Noob TT is ur last resort

Hi folks, AFAIK only PAM199 has polished SS case and waffle/carbon look dial but its limited edition and i do not like regatta on the dial .... I love DSN's PAM025 waffle dial, but I dont like Ti at all. If I commission Davidsan to build me PAM024D but put waffle dial from PAM025, how bad this creation will be? Complete fantasy watch right? If so how bad u think it will look like in eyes of PAM addicts and us geeks in general? Any opinions are welcomed AK

as first sentence in my original post states: Tony from asian7750 dot com

It has not been repped as far as i know....

$268 as advertized on tonys site. yes full ceramic case with woky pushers as we all know.

No its old white on black. My hybrid AB2 has Taka's correct DW though

Hi folks I have ordered HBB ABII lite form Tony (asian7750) for replacement parts. I needed bezel for my V5/V1 ABII hybrid as well as new A7750 for my RG HBB project. It is form the lastest batch and I was surprised to find the following in the package: 1) I have not recieved any previously ordered V1/V2/V1.5/V5 HBBs with protective plastic cover. This is new to me: 2) This V1.5 HBB from Tony now comes with rotor with correct bearing (He also has them available as spares for $35). For comparison, this is the pic of V1.5 ABII that I have ordered from Tony back in May. 3) Not really a surprise ..and not really pleasant....but as other members have noticed strap lugs covers are not sitting flush with the upper case plate. They also do not extend far enough below the bezel but thats the old news. This can be easily spoted when compared to V5 case: However, V1.5 lite ordered back in May did not have this flaw. These are pix of V1.5 AB2 back from May: So once again, rest can be assured that quality and fitment of parts on V1.5 HBBs is inconsistant as factory is putting them together with whatever parts avaialble.

As the thread title says... Can V2 dial be retrofitted to V1 (28k) A7750? Crappy V2 (21k) mvt died in my RG Ceramic HBB I need to get V1.5 for other spares, but I will have 28K mvt to use for the RG. Would dial feet need to be sanded / repositioned? is this something a regular watchsmith can do? Any inputs? Many Thanks beforehand. Alex

Like your nick...i also love my STI