55evp

thanks for the info. unfortunately i don't trust myself getting inside my watches so i'll have to leave that to the pros.

got a DSN 240 roughly a week ago and thought I'd post a few thoughts. keep in mind this the second watch i've received from him. first was a nice 111h. the transaction was flawless. good communication and lightning fast shipping. received the watch and couldn't wait to assemble the strap and put it on. my first concern was the case. i had heard that some were coming with less than acceptable cases. i inspected every aspect and was quite pleased with the overall cleanliness of the exterior. no dents, dings or machining marks. the crystal was nice, sitting just a hair above the bezel and coated nicely with a subtle blue tinge that wasn't too obvious. the cyclops is good with good magnification. i assembled the strap and immediately noticed the typical stripped screw tube threads. whatever.....just used the spring tubes and problem solved. crown guard is average. it's overall look is very nice but operation is on the sloppy side. the fit to the case is 95% with the tiniest of gaps on the bottom 6 o'clock side. no biggie, perfectly acceptable for a rep. CG lever is visually acceptable but has a lot of play when in the open position. i won't complain yet regarding it's less than positive feel in the closed position because that's more of a function of the spring loaded crown. i would like to be able to reduce the side to side play when open but don't know if that's possible? on to the movement. the crown sits way too far away from the case. it almost looks like it sits in the open position for setting the date but that isn't the case. the crown also sits at an angle as you look through the CG. as you pull the crown to set time and date, the date position is easy but you have to give quite some effort to pull it to the time setting. once open to set the time, the crown basically rubs on the CG as you turn it. not cool. the watch keeps good time but the date stopped working 1 day after receiving it. not cool again. i went to set the date today after returning from work and guess what? now the date cannot be set. the crown just spins. you can feel it wanting to engage but isn't catching. not cool and just plain BS. the dial is good. clear and very clean. no complaints for a rep other than the poor lume witch can be fixed. overall, i'd give this watch an 80% out of 100%. for the money paid i would expect everything to be at least in reliable working order. i'm happy with the visual aspects except the crown sticking out too far. it appears that some modding is in order and i hope this watch can be brought up to the 90%-95%. lastly, do you members think the mechanical issues and CG can be remedied with modding and who would you recommend to do this? thanks for your help and thanks for reading.

hey all, just received my 240 and i have a bit of an issue with the CG locking lever. when closing the lever it does not lock into place very securely. it's not so bad that it flips open by itself, but it is fairly loose. i understand that the crown is spring loaded and that the lever may never be as positive as my 111, but is there anything that can be done to allow the lever to snap down better? thanks in advance for your knowledge.

thanks guys for the replies. just got an e-mail from him. all is good.

No response to 2 e-mails and his photobucket gallery is down. just wondering if everything is still up and running.

who does have the nicest case? i'm sure that's a subjective question, but if not DSN, what rep manufacturer?

thanks guys for all the suggestions.

the screw tubes on my DSN 111H seem to be a little short. the non-threaded side seems to recess too far into the case and it looks a bit strange. do any of you have any recommendations for longer screw tubes? they need to be about 1mm longer. thanks in advance.

thanks for the info guys!

love the sandwich dial look and was just curious what other PAM's have it.

when he replied to me sat. regarding the shipping status, he stated that he would provide me with an ems tracking number today.

just put some popcorn in the microwave, this could be good.

thanks guys for the answers. i haven't actually been able to get him to physically ship the watch yet. it was supposed to be shipped last week but no go yet. i'm being patient but i hope it gets shipped soon. i had just read about some of the issues with ems and customs in other threads and was just curious if i should suggest an alternative method of shipping.

Ordered a 111h a few weeks ago. Haven't ever used EMS previously for anything so don't know much about reliability. Does DSN ever have issues getting things out of China into the US? TIA for the answers.

however vile and sick this stunt must be, this pathetic excuse for a human artist will have the last say. in other words, his little stunt has been more successful than he could have ever dreamed. with his disgusting "project" completed he has stirred up a furor that has made him and his name a household term for a lot of us. bad press is still press.

yeah, the yahoo address went funky for me to the other night. however, it's up and running now.