wothrottle

montbrillant legnde, 47 mm diamenter but not tall, looks much much smaller than a SA for example. Lokks good on small wrists for sure and is the best bang for the buck breitling at the moment.

as i

8. Voila. Your new much improved bracelet ! It feels much smoother and the shine is fantastic. And since using baby oil no harm to the skin.

Hope this small HOW-TO helped you.

7. Cle3an residue off with a soft microfiber towel, you can also use a toothbruch with some dish washing detergent , flush with hot wanter and dry.

6. Now polish the whole bracelet including clasp. spin the dremel and press it against the polishing wax, now polish. nothing easier than that. you can use the slowest speed to get used, in most cases this is enough to bring it to a shine. start with some pressure and reduce the almost no pressure.

Also polish inbetween links like shown.

5. Polishing. Polish the edges using a dremel tool with a polishing kit ( blu wax paste ). polish the edges to high gloss and smooth them further.

4. Next step is sanding. The inner edges of both my bracelets are kind of sticky to the wrist with their hard edge. I used a sanding stone in the pic, probably grit 120, use some oil to the stone and sandpaper to smotth sanding. after 120 use some 400 grit paper in a 45 degree angle.

3. Us esome Baby Oil and bath the bracelet, you can remve the clasp for this and only deal with the two smaller bracelet pieces. remove from bath, jiggly all links, bath, remove, jiggle, bat, remove,jiggle,.... till it feels smooth

2. Remove the Bracelet, with some watches it

1. Adjust the Bracelt to your wristsize. After that adjust the clasp, although I only have two Breitling reps, both came with a sloppy clasp that screams fake.

Tap all the pictured spots with the hammer, most of the with the plastic side. the flip lock has to be tight, Tap and control, Tap and control till the clasp feels like it should ( only tkes some hammer strokes and changes the whole bracelet )

Bracelet modification

sounds very similar, mine is also not that loud, but i can hear it in a qiet romm when lifting my arm for example.

I assume wraithride has a big bang chrono, therefor his movement should unmodified....but the same sympthoms.

just deciding if i send the watch back.

I don't know if this is what you're talking about, but I also have a Big Bang, and if I take the watch and tilt it one direction, the rotor makes no noise, just the slightest whisper of the rotor moving. When I tilt it the other way, there is a ratcheting sound, which I always assumed was the mainspring winding. If I tilt the watch back and forth, it sound just like someone with a socket wrench tightening a bolt. One direction no sound, then the ratchet. My BB isn't serviced, and I've had it for about 6 months or so.

WR

exactly the same with my watch.

the rotor is freshly oiled, but that

got my hbb king and the rotor sound is different than my other reps 7750. in one direction it spins free, the other it winds, but winding sounds like a ratched, i can hear it when moving my arm.

some guys on repgeek wrote that this is a common problem with the non crono 7750s, do you agree?

what can i do to eliminate that sound?

great watch

wristshot please

the montbrillant legende can be an option for you. other than the sunken datewheel it

really nice with the bracelet

sorry but can

This is what Id call all black

Long live Flavor Flav! (Although he is not around here nomore )

where can i get this?

get an SUPER AVENGER, the Mointbrillant legende or the breitling for bentley Flying B.

how do you like the monty DAVE ? please post some more wrist shots, this watch is soo beautiful.

btw, does the sunken datewheel bother you much in real live or isn

maybe you can direct me to that thread, can