Sorry to revive an old subject but I was wondering if anyone has managed to get the bezel off an SOH? Mine is not lining up correctly and I wanted to get in there to "see what I can see" but don't want to risk damage by using to much force.
Overall the bezel on mine is a little odd. Curious to know if others are the same. Started out that the triangular mark on the bezel would not line up at 12. It lands either a little ahead or a little behind of 12 from one click to the next. To see if I could figure out where the discrepancy was I looked at other alignment cues on the outside of the watch. The insert seems aligned with the bezel OK (ticks at 5, 15, 25, 35, 45 55 are pretty much in line with the screws around the outside of the bezel). I also noticed that from one click to the next the screws were not centered between the lugs (same issue as at 12). This led me to believe that the mechanism may need "adjustment". Then while rotating the bezel all the way around I noticed that the triangle mark lands perfectly at 15 and 45 positions but not 12 and 6. So then I counted the number of clicks...only 110. Odd number. Anyone else have an SOH like this?