marc jacobs

Sure that's yuki new 5513 aftermarket dial :

http://www.yukiwatch.com/catalog/item/6380817/6217009.htm

Yuki have yellow lume 16800 matte dial in stock:

http://www.yukiwatch.com/catalog/item/6380817/7597436.htm

I normally like to use genuine parts as much as possible, but for a quick budget project, I'd rather keep the $500 in my jeans then spend it on a genuine dial.

Just curious as to who offers the best aftermarket 16800 matte dial? I see a white markers on Yuki's site, but it shows on back order.

Thanks!

Wanna know, which Omega watch can fit for this bracelet?

My link

Thank you.

Yup yuki 1680 caseback can fit with gen 1680 case.

Anybody know if a yuki case back or other rep. case back will fit a gen 1680 case. If anybody has one let me know, As always appreciate the help.

Nice! Case and Dial ... everything look so great!!!

Cool! 700 crown and a 700 tube from Yuki and it fits perfectly.

Will try the tube and project 5512 soon.

I have a 700 crown and a 700 tube from Yuki and it fits perfectly it looks exactly the same as Freddy's picture. Now I am forced to build a watch that can use it what a dilemma. he he

I have to point that the crown is genuine to avoid confusion

Epoxy Steel is look work, please keep post. Thank you.

I really think that using the Epoxy steel will work just fine. I will try and post back.

Cool! Blue tone tudor sub ~~

I have email yuki.

She confirmed 1680, 5513, 5512, 1665, 1655, 5514, 9411, 1675, 5517, 6263, 9420 are using 316L.

But can't sure 6538, 6536, 6542 ...

I have no direct experience with aftermarket 1680 cases, but I sort of agree with Ronin. I have found that Yuki's English communication skills are quite satisfactory, so I would just check to be sure you can return his case if it does not fit (my experience with other Yuki parts is that they will accept the part back without any problem as long as you demonstrate why it was defective or incorrect). In any case, unless you are 100% certain that crowns, tubes & crystals are gens, I would factor in the cost of gen replacements no matter which aftermarket seller you buy a case from (why would you expect to receive a gen crown/tube from a seller of aftermarket cases, crowns & tubes).

Hi Freddy:

Thank you for your explain and photo.

Could you mind to show me the photo of 700 Twinlocks case tube.

Because I don't have idea how does it look like.

I think they are different with Triplock case tube.

700 crown is it also using in 6536, 5512 and 5508?

Thank you so much.

Ditto Ubi. The earliest 6263s were fitted with 700 Twinlocks. Later, the factory fitted 702 Triplocks. Today, Rolex installs 703 (or 704, which look the same as a 703) Triplocks during servicing

Agree with you! Who said gen are perfect!!

Was looking at a few gens on the net the other day, just window shopping i guess, came across this tt sub, looked nice until i noticed the rehault engraving, think my rep looks pretty good after seeing this!!! enjoy...

2784 and 2824 hand set is same

Seamaster 300 & Panerai 3646 is look pretty good

He's also got a Seamaster 300 and a 6263 Daytona

can say yuki case is reasonable price reasonable quality.

Is a case from jewelry and watch that much closer to gen or can I put a little work into

a yuki case? blink:

Yup,fit 1.8mm springbar only,

also yuki have a long time didn't have 7836 bracelet.

I m waiting yuki restock it...

20mm solid bracelet have big discount discount.

http://www.yukiwatch.com/catalog/item/6784664/7909371.htm

This is a strange one. I bought a second 7206 expander for my Space-Dweller project back in July, and it came with Yuki 2mm bars pre-installed. These were not jammed in place, and were easily removed. From what I could tell, the endlinks were not deformed, and you can see pictures of them here.

On a side note, Yuki has confirmed that their 7836 rep will not take 2mm bars.

Just see a new replacement part for omega seamaster 300.

Is it good for bulid a new project with this?

Thank you

Is it ETA 2846 same as ETA 2824? (the dial feet and window position.)

My link

If yes, no alignment and redo with this dial.

Welcome to the 1665 Sickness.

Yuki some decent, better than MBW whites last time I checked. There is also a decent "fool someone at arms length" Rail Dial version out on eBay.

Some have mentioned the "PT 1665" that you have with the 2846 movement has date window alignment issues, so heads up you may need to redo the overlay.

Thank you for your project and post ~~~

Interesting that they're listed to fit either 2824 or 2784; 2783 and 2784 have the same stem height/position as a 2836...

I have a same question with yuki,

she just reply me, she know they are same stem position.

But she are not sure their "extension wheel" can it fit on 2836.

Just saw this helpful item eta 2824 adaptor on yuki web.

Rolex gen movement price is keep raising, I will try it on my next project.

Totally agree with freddy.

Dial feet that are too thick or too long is a common problem.

It is not only happen on yuki dial. NDT, JW and others dial also have those problem.

Thanks gavidoc. The dial and insert look great.

Lucky,the hand set is come from the 7734 movement.

You can see the orange second hand it look totally different.

I think yuki will have the 7032 hand set soon.

Nice MJ!!...where did you source the hands? From CWP or were they 1019 hands from Yuki, broached to fit the 7734?

My MBW 7031 case and dial is come from yuki.

Assemble smooth with hand set and 7734 movement(70's chrono watch call "Fradition") brought at ebay.

Hooray!Yeah!!7031!!!

My MBW 7031 with NATO strap.

Look similar with new tudor heritage chrono.

But i can't find a 6 o'clock cyclops crystal.