ap-royal

Thanks for the advice. I really like my watch so would really like to get it fixed as long i can get it done for an acceptable price.

You mean swap the whole movement? is that possible and if so do you know the approx cost and who to go to? thanks

Dear members, I need some one in the UK or europe (prefered in UK) to repair an AP offshore A7750 movement. Either the keyless-works is damaged or the teeth on the gears could be damaged, so it might be needed to replace the gear and clean the movement of shrapnel. Would be very thankful for any advice on who to go to or contact for the repairs and approx how much cost am i looking at. Thanks very much

Hi Francisco, I have been trying to contact you regarding repairs to an AP offshore. Had a few questions. I have PMd you, just checking if you have recieved. thanks

THANKS TO BOTH OF YOU FOR YOUR RESPONSES. APPRECIATE THE HELP. SO IT LOOKS LIKE I HAVE DAMAGED THE WATCH AFTER HAVING IT JUST FOR A LITTLE WHILE. IN REFERENCE TO "Toadtorrent", IF IT IS ONE OF THOSE TWO PROBLEMS YOU HAVE LISTED, IS IT COSTLY TO GET FIXED? AND ALSO I LIVE IN THE UK, SO THE SPAIN SUGGESTIONS WILL BE DIFFICULT FOR ME. ANY UK SUGGESTIONS?

THANKS FOR YOUR REPLY. I TRIED WEARING THE WATCH THE WHOLE DAY TODAY AND MANUALLY WINDING IT A FEW TIMES, BUT STILL NO LUCK. I HAVE A FEELING I MAY HAVE DAMAGED IT BY WINDING IT TOO VIGOROUSLY. IS THERE ANY THING ELSE I SHOULD TRY? AND IF IT IS DAMAGED SHOULD I TAKE THE WATCH TO A WATCH REPAIR SHOP? IS IT A MAJOR OR COSTLY JOB? THANKS

THANKS TO EVERY ONE FOR THE RESPONSES. THE WATCH DOES HAVE THE SECONDS CHRONO AT 12 POSITION. I TRIED WEARING THE WATCH THE WHOLE DAY TODAY AND ALSO WINDING IT A FEW TIMES BUT STILL NO LUCK. I HAVE A FEELING THAT I MAY HAVE DAMAGED IT BY WINDING TO VIGOROUSLY AS MENTIONED BY ONE OF THE FORUM MEMBERS. IS THERE ANY THING ELSE I SHOULD TRY TO GET IT GOING AGAIN? AND IF IT IS DAMAGED, SHOULD I TAKE IT TO A WATCH SHOP TO GET FIXED...IF SO IS IT A MAJOR JOB THAT MAY COST LOTS OR HOW MUCH SHOULD IT COST?

Thanks for the advice. Im going to try try winding it by wearing it rather than winding it manually. Any reason why manually winding it is not working any more? and also why is it best not to wind manually? and is it supposed to be wound clockwise or anticlockwise (thats when it makes the clicking noise)? thanks

Hi, I am new to rwgforum and was hoping for some help. I have an AP royal oak offshore steel. The watch has been working perfectly since i purchased it. I dont wear it all the time, so after dicontinued use I wind it by unscrewing the crown and winding it clock wise, then changing the date and time respectively. Then screwing the crown back. Since i've purchased the watch, i have noticed that every now n then (2 out of ten times) even after winding and screwing the crown back the watch does not start up. So maybe i thought i was not winding the watch correctly. Should the watch be wound clockwise or anti clockwise? when i wind anti clockwise, it makes a repeated clicking noise. But now I have a bigger problem. Recently, i was using the stop watch function and without resetting the stopwatch i took off the watch and put it away as normal. 2 days later, I tried to wind the watch up as normal but now the watch wont start. I dont know what the problem could be or am i doing something wrong or is it something to do with the fact that i didnt reset the stopwatch function before putting the watch down so it unwound while stop watch was running? I would be grateful for some help and advice.

Hi, I am new to rwgforum and was hoping for some help. I have an AP royal oak offshore steel. The watch has been working perfectly since i purchased it. I dont wear it all the time, so after dicontinued use I wind it by unscrewing the crown and winding it clock wise, then changing the date and time respectively. Then screwing the crown back. Since i've purchased the watch, i have noticed that every now n then (2 out of ten times) even after winding and screwing the crown back the watch does not start up. So maybe i thought i was not winding the watch correctly. Should the watch be wound clockwise or anti clockwise? when i wind anti clockwise, it makes a repeated clicking noise. But now I have a bigger problem. Recently, i was using the stop watch function and without resetting the stopwatch i took off the watch and put it away as normal. 2 days later, I tried to wind the watch up as normal but now the watch wont start. I dont know what the problem could be or am i doing something wrong or is it something to do with the fact that i didnt reset the stopwatch function before putting the watch down so it unwound while stop watch was running? I would be grateful for some help and advice. Thanks