Rolexfinder

Vietnam case + Gen Movement. This description was told from my friend who pawn this watch with me What do you think? Cheers, Paul

Well, guys. I am now about Germany post by now. They return one of package I sent to one of you there. What did happen to Germany custom lately? Even parts, I cant send it? Cheers, Paul

Hello Guys, I am sorry that I did not reply you properly individually. So please let me write message to all of you here. @ Tanfo, MyNameIsPeterAndImOld, and aanival All of the cases I sent to you guy already did respectively. Tanfo is the first one I did sent him the case since June then MyNameIsPeterAndImOld, and aanival. I promise you three will have my first priority at my service before I start the others. I have to apologize for my delay for this but few cases just finished last month. Especially, for Tanfo, if you have not get your case yet, I will resend it again to you with another courier. @ George, Hope you are doing well. You know what did you am doing just now. If you are able to manage to get the white dial AP ro, please let me know as I get the right factory to start the project now. @ Theo, Nice to hearing from you, mate. I still keep my promise for the dial project, my friend. This time the dial project is my turn without MBW issue anymore. Let me explain you like this. Since when the time I announced for the further project of new Dial for AP, I got advise from my good friend - George who explained to me for how hard to replicate the dial of AP regarding to its detail. I admit that the MBK dial is below standard by now. Hence, I did try for easier project like Panerai Dial which you guys might follow from this threat: http://www.rwgforum.com/topic/116926-ultimate-pam-249-dial/. Only with this dial, I have to get it corrected to the company more than 3 times and everytime costs me for a new block. I am sure if I can make the Pam 249 dial done, I will be ready for our AP. @ everyone, I know you guys think I left the mess in AP forum without correcting it. I have to say I did not run away from you guy but everything have the process. I cant get it done really soon but I promise I will do it. And again for Tanfo, MyNameIsPeterAndImOld, and aanival, please accept my deeply apology for being late in sending the cases to you. I have to wait for MBW to finish his case which this will not happen anymore because I have the right factory now. Hope you all understand. Cheers, Paul

see no different, mate. Cheers, Paul

That's all? Cheers, Paul

Ok guys, Talked with the company just now. Because I want it close to gen. Do you think using this dial as base for vintage dial will be ok? If yes, please put the requirement that I have to do on the dial to make it in vintage: 1) Take L word out 2) Unlumed on the number. Cheers, Paul

@ exper Nice posts, mate. The pic of Aleenta is really nice. I will go to Pranburi soon as well. It is such a nice beach which far from people. Cheers, Paul

It is in the process, mate. It took too long cause I did order other projects also. Cheers, Paul

I will try those 2 for you. Cheers, Paul

Hello guys, Thanks for your fast respond The fonts look bold because they put too much lumed on plate I did tell them to fix this already. Anyway, I think it is very ok on the color and lumed. Cheers, Paul

Hello guys, please accept my apology for being selfish by did not let you know the progress of the dial as well as did not reply you promptly or never reply,there are a lot of PMs flood in my pm box almost everyday. So far, the second prototype dial is here. It is almost done, mate. From my inspection, it is around 90% close to gen already.

Well done, mate. It is great combination.

It is a nice watch, mate. Enjoy your time with it. Cheeers, Paul

@NoobyPanFan: I totally understand your thought, mate. I am the same with you as well. If there were no suggestions from our members as well as my factory itself regarding the true numbers' color, I already deiced this is the best from the factory. Anyway, let's see the ultimate dial together. Moreover, for anyone who asked for an ultimate completed set of Pam 249, I send my order via one of our fellow in EU, now. I might get the gen Pam 249 for this factory. Which means we might be able to have the true ultimate Pam 249 in the future. For production, I intend to run the number on the case in order to make it close to gen as much as possible. With this custom made project, we will get the best Pam 249 from Homage watch factory which have quality as close as gen (you know that we dont have to pay advertising and raise price to $15,000 something for Pam 249. ) Cheers, Paul PS. for people on list above who are the first group of heroes from every boards who risk their money into this project with me I will reserve the right/ priority for them to get a completed set of Pam 249 which I have to do in with in this year. To be honest, you guy made me go far than what I want to finish this year!

DR, Please correct me if I am wrong. The date pusher you mentioned are for the Pam that fit with ETA 7753 movement, right? Most of standard rep are fitted with Asian 7750, mate. Cheers, Paul

Niceeee

1) Rolexfinder 2) NoobyPanFan 3) Shrimp 4) Mir36 5) Cubeistan 6) cskent69 7) nakortheblue 8 ) TK471 9) ismaelmv 10) Snrubb 11) NiLo 12) TonyRome 13) senator 14) esdee 15) tanya 16) Leo 17) R_Squared 18) Mr.Majestyk 19) sul 20) burrppp 21) rolli 22) hava 23) big e 24) PrDubis 25) goin6633 26) Webby 27) HikeUSA 28) panerainuts Thanks for your interest, my friends. This dial is nice but not the best. Please wait for the second dial that get more gen look on this one. For case and hands, to get the best for our dials, I am getting the gen parts to replicate it. Meanwhile, you are able to use any homage case for it first. As it is a custom made not massed production, dial cost is sure higher than the normal replica dial. By now, I am talking with him in case of 50 dials production. I will let you know. Cheers, Paul

Hey Guys, Here is an update news. As per information from our respected member, the lume color before charged of the protoype dial does not be the accurate one yet. Hence I did talk with my factory owner who, surprisingly, said this issue before I started this topic with him. Good news, he said this one is only for checking the dimension, size, and weight. For the second prototype dial with better color finishing surface + lume color which is more accurate than this one will come out soon. To be honest, I cant wait till that day. @ Senator, Those parts are being hunted by me. Try to talk with couple of dealers in online market. There is a chance to get but very small chance. Here is a waiting list: 1) Rolexfinder 2) NoobyPanFan 3) Shrimp 4) Mir36 5) Cubeistan 6) cskent69 7) nakortheblue TK471 9) ismaelmv 10) Snrubb 11) NiLo 12) TonyRome 13) senator 14) esdee Cheers, Paul

1) Rolexfinder 2) NoobyPanFan 3) Shrimp 4) Mir36 5) Cubeistan 6) cskent69 7) nakortheblue TK471 9) ismaelmv 10) Snrubb 11) NiLo 12) TonyRome 13) senator Thanks again for every compliments. @ W0lf, Let me finish this project n some A series dial first, mate. @ projectologist: For the matching color of number, I dont dare to say anything before I have an evident. I will be compared with gen dial once I got it back from my factory. Then we will see together. Cheers, Paul

Hello, Thanks for your participation, my friends. There are a lot of people pm me regarding to the whole completed project of Pam 249. Let's go step by step then For this dial cost, I am talking with my factory. It is depended on quantity we order from him. Cost will be discussed. Here is new list: 1) Rolexfinder 2) NoobyPanFan 3) Shrimp 4) Mir36 5) Cubeistan 6) cskent69 7) nakortheblue TK471 9) ismaelmv Moreover, there will be more fellows for this project from other boards, so let me count how many we will do to get the right price.

1) Rolexfinder 2) NoobyPanFan 3) Shrimp 4) Mir36 5) Cubeistan Here is more pic Cheers, Paul

1) Rolexfinder 2) NoobyPanFan 3) Shrimp

Thanks for all compliments, mate. So I will put the list in this post to count members who want this dial. 1) Rolexfinder 2) NoobyPanFan

That wont be long, mate. It will be available within next few months. P, I am dealing to get them. The reason that I did not take them from the same source because I dont know how to explain why I have to buy those gen parts at the same time. If there are any source for these part you have, please let me know. Cheers, Paul Thanks, mate. I have the same thought with you. Anyway, I am negotiating price with the factory, it would be great if you guy let me know who want this dial. I might get the better price if I have quantity to talk with him. Cheers, Paul

He he he, you all have the same goal with me because there is no ultimate dial for me in the market. Hence I try to get the genuine one from AD and sent to my factory. I told him I wont mind how much I have to pay for really close to gen pam 249 dial, please do your best. This is the prototype he sent to me before the finish production. I would say this one is so impressive. You wont disappoint on this one. Cheers, Paul