fishrising

Close enough to 5:00pm! A PAM243 on a Greg Stevens strap:<br /><br />

So.....I opted for a $125 Worn & Wound watch roll, thanks to the lead from "EMM:" http://shop.wornandwound.com/products/watchroll-gc-brlhttp://www.beast.com/watch-roll Plenty of room for my 47mm PAM187 on a 175x95 Hanzoku strap: Fit and finish is excellent! I really like this watch roll.

And now a black custom Hanzoku 175x95:

PAM187 on a custom Hanzoku 175x95 showing some tail at work today.

PAM187 on a custom Hanzoku 175x95 showing some tail at work today.

Today is BK Ceramic Blue Sub day!

Today is BK Ceramic Blue Sub day!

Back to the DSSD for Saturday, but not heading into the deep sea, but rather the back waters of Naples and Rookery Bay in Florida for Redfish and Snook:

And then the 187 for Kobe filets, Kobe burgers, Usingers knockwurst and grilled asparagus!

Yup, with the top down!

DSSD!

Anyone know where to get a replacement DSSD bracelet? Any dealers carry them? I've tried searching via Tapatalk but its a pain.

Hey All, Looking for thoughts on what travel cases for watches, that can accept PAMs with long straps. I have a case that works with my 187 (47mm) with "regular" length straps, but I don't use regular length straps. The one in the picture is 175x95 and doesn't fit. Any suggestions?

Pic does not do this one justice, what a watch! PAM187 fresh from Toro, and on a Hanzoku custom 175x95 strap:

Pic does not do this one justice, what a watch! PAM187 fresh from Toro, and on a Hanzoku custom 175x95 strap:

3rd time is a charm!

Anyone know how hard it would be to re-align a number on the bezel of a N Factory PAM187G? Are they just glued on, so maybe using a soldering iron to heat it up, and then reapply? Like for instance, if you received this, what could be done to rectify the "5" in "15?"? And please no finger nail cracks, they are not mine...

Does this "15" and "45" look better to you guys? Anything else I am missing?

Thanks dropbear2008! I am editing this thread as I did not realize the sensitivity to posting QC pics from dealers asking for help in looking for potential flaws. Case of a NooB not reading everything. EDIT: I can't edit it the original ...too late...sorry...

Please offer your thoughts on these QC pics, for a PAM187 I am acquiring, thank you!

I like it!

Thanks guys, I am debating doing it myself, but I also want to look at what it would cost me to have someone do it, especially if they can pressure test. Only people in my area with a way to pressure test are either ADs or small watchmakers who wouldn't touch a rep.

Looking for recommendations on who I should send my (1) PAM111 N series from Noob with factory upgrade V3 to make it as WR as possible? And (2) who should I send my DSSD to (it's either a v6 or Ultimate, not 100%) to make as WR as possible, and better align my pearl, and verify which DSSD I have and what the movement is? CONUS would be preferred, and if in the Northeast US, or CT, even better! Thank you! In the meantime I will continue to search and read and see what I can come up with on my own.

Hi All, new member here. Have owned several Gen watches that are discussed here. But have let all of them go, due to other hobbies. So, now my interest is in Rep watches, not sure how far I will go with them, but I sure miss my PAM164, so I just ordered a PAM111 N series from Noob with factory upgrade V3 from one of the forums recommended dealers. After I receive this one, there may be others I will desire. Look forward to reading and learning! I have been a member (same username) and have references on the www.rolexforums.com and other related sites. Thanks! Ben