2pac

There are two TC cases with drilled lugs





Gesendet von iPhone mit Tapatalk

66

If you drill the JF case it will still be a 16610- just with lugholes.
 

Hi, and what about to drill the case of newest jf 16610?

Hi, and what about to drill the case of newest jf 16610?

On genuine watches a cal 3135 will not work in a case made for a cal 1570/5 date movement because the stem will not line up in the case tube.  A 3035 will fit, depending on dial size.
The beat rate is also wrong with the 3035 and 3135, both running at 28800 bph and a 1570/5 at 19800 bph.  Cal 1530/1560 run at 18000 bph but they were not used in 1665 watches.  The beat rate is really not important except it is a 'tell' because the second hand travel is much smoother on faster beat movements.
 

You have pm

Hi guys, I'm reading and reading..

But I have a question for who have more experience than me..

The rolex 1665 drsd use a 1575 rolex caliber who is 28.5mm diameter and 6.30mm Thickness...

The rolex caliber 3135 is 28.30 and 6.00 thickness..

My question is the following : the Sh 3135 movment Can fit in a 1665 Vietnam case?

Thanks

Sent from my iPhone using Tapatalk

Which case is it?

Is possible do some mods for have it more lighter in color? I had one and is too much dark silver

Really good work, but I saw a gen silver date wheel and isn't that metallic color. Try to do one with white color, on the net is only possible find white dwo but with thinner font than the gen

If you go gen, a gen datewheel and gen movement.
otherwise depends on the movement and correct DWO for the build.

which date wheel do you put in your built?

Guys where i can find a correct dwo for The 6542 project? ETA or dg movement..

Thank you

I like it!

The dwo It's open 6&9?

Hi guys

I like Cartier brand, i like the Santos 100 and the Santos galbee...

Exist a high quality copy of the galbee?

Exist a high quality copy of Santos 100? Mid Size? SS version or SS and gold version...

Thank you

Hi guys, where i can find a real good white/silver open 6 & 9 dwo for an eta 2846 of my 1680 ? thanks to everyone

really hot piece! 

i hope this cartel accept gen spec parts 

the bezel is a little thicker?

the rehaut is really nice

the 128$ it's the same?

finally better cg on vintage pieces, probably the same on the 128$ ? 

i hope, it's a good start for our projects

ogladio you are really informed about the 6542 project, really good  

i contacted Silix, and i ask to him if he can find for me only the case of rols176.. he reply to me he can.. but without the bezel ring.. it's the reason why i asked about an aftermarket bezel.. 

in theory yes my budget is limited around 1000$ 

i find this dial.. http://www.vintagewatchmaker.com/product-p/d-05.htm it's around 450$ 

in the same site there is the bezel... without insert around 300$ and with bakelite insert 550$... 

but i don't know if it fit on the rols176case... 

it's difficult find a gen 115 plexy? 

how about put an aftermarket bezel on the rols176 case? 

ok for dwo i will contact erick76 

if from the silix rols176 case i will use only the case? and i buy another aftermarket bezel? you think it will not fit in the case? 

yes tapatalk it's not good for search  

in 6542 puretime cartel case i saw the rehaut is too wokky.... holes for springbar is not centered....... i don't know if is a good idea start from it.. 

i saw freddy start from sub silix case... probalby i will buy one of it...

i want put a DG3804 movement in my project.. but the roulette dwo for this movement.. where i can buy it? 

for the bezel i'm looking on the bay.. there are some aftermarket bezel assembly.. but i don't want the bakelite insert, i want the metal insert. 

also i want gen crown tube crystal and springbars.. 

Dial.. where i can find a gilt dial for my project? yuki gilt dial it's ok?