![](https://rwg.cc/datastore/theme_resources/set_resources_30/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
Jimmythree
-
Posts
85 -
Joined
-
Last visited
-
Days Won
1
Posts posted by Jimmythree
-
-
"No, tell us. We want to know the story!"
Let's just say "I'll take all you can get" may have bounced from my bird brain to my alligator mouth at some point during a conversation.
No disrespect to alligators. J3/amc
Crocodile image by Hopsy.
-
Ubi said: "Quality over Quantity" and I agree.
But today I say: "Quantity over Quality."
Wristie:
Watch on the left is a lower $$ '21J' model with the M hand/H hand and center hand frozen. The seconds hand at 6 runs all the time.
The watch on the right is part of a family.
Pam-dam!
Too many dependents in this family:
A few more...
Group shot...
There is a story behind this family but I'll not bore anyone with it.
J3/amc
-
"Where they sold as full presidential watches in fake 18k gold cases or sold as original day date movements coming from presidential watches?"
Afaik they were sold as complete watches. The two my friend had were hard to tell from genuine except for the aftmkt diamond dials. They also had diamond bezels, very well made with genuine diamonds.
Looking back, I think one was 3035 base and the other 3135, can't be 100% sure.
I had an 18K replica 'zenith' Daytona on an oyster bracelet in August 1998 with an ETA 7753 and it was also very good. It had two flaws...too thick and the black dial was not as good as the case and bracelet.
I soon traded it away but it would be worth a lot today just for the gold.
There were a lot of replica solid gold watches floating around back then and a trading site about 100 miles away had two or three traders always selling gold replicas so no one kept one for long. They also had tutone models with 14K or 18K fluted bezels and tutone jubilees with 14K or 18K center links. They went for about $650 for SS/14K and $750 for SS/$18K, all with new ETA 2836 with (used) genuine crowns. Last one I had was probably 12 or 15 years ago. Gold went way up and the 18K watches went away, scrapped probably.
Gold was about $285 per Troy oz back then (August 1998) and $1820 today. Price of 18K gold per gram then vs now = $6.87 vs $43.90 so if an 18K case and oyster bracelet weighed 100 grams back then, it was about $690 then vs $4400 today. Still have one of the 18K cases and it weighs 29 or 30 grams (with bezel, no crystal or crown)...29g = $1273 today.
-
Dow Mk is nothing out of the ordinary as far as modern lubricants go and Lithium grease has been around for many years. Always wondered how it ended up in watches.
Anyway...if someone is worried about it contaminating cleaning/rinsing solutions, maybe clean/rinse the parts with Mk in separate, smaller batches of cleaner/rinse.
I use Moebius 9415 on pallet jewels and it seems to work Ok.
" I was talking to a watchmaker some months ago and mentioned to me that he used two Seiko oils in All of his work and was able to give a longer warranty to his customers because of what he used!"
This was the rule before the internet made everyone crazy when it comes to watch oil and grease types. Two different grades of oil (fine and thick) plus mainspring grease and setting parts grease...that used to be all there was. Two of the best oils back in the 1940s/1950s were used by Elgin and Hamilton watch companies. Hamilton made their oil on site in what was then the smallest oil refinery in the world and Elgin may have made theirs too, don't know. Many purist types still use the old Elgin oil and it still works fine after many years.
Here is an empty Elgin bottle, instructions, and box set on eBay...
Vintage ca.1950's Elgin Watch Oil Bottle, Original Box, Enclosed Paperwork. | eBay
It sometimes came in a fancy bottle...
Vintage ELGIN WATCH OIL BOTTLE | eBay
Here is a Hamilton PML 79 oil set...
Hamilton PML 79 Oil With Oiler-With Box-"Made Especially for Men's Watches" | eBay
Imho there is a LOT of BS about watch oil. Over 20 years ago just for grins, I c/o an old rolex with a 1570 and used Mobil 1 on the train wheel pivots/escapement, a/w pivots etc, Gal-Gard Engine Gard (molybdenum disulfide oil additive) on the MS and barrel wall, red Kawasaki Jet Ski grease on the setting parts, and K-44 silicone lube on the gaskets. It ran just fine for years and showed no signs of wear anywhere.
We used the Kal-Guard additive in the oil on 1980s hot rod 4 valve Suzuki GS 1100 motorcycles to keep the camshafts from galling. It made the oil black as tar but it worked.
DuPont Molykote DX Part number 404532050
About this item:
- For long-term lubrication of metal parts and for assemblies.
- For precision mechanical systems.
- For watch movements and other chronograph/horology systems.
- Resistance to water wash-out. Good corrosion protection.
- Prevents stick-slip and seizure. Excellent protection against galling.
MOLYKOTE DX- Greasy paste normally used for setting systems and other high friction areas. Lots of brands for a LONG period of time have used Molykote for their setting systems because of reliability. Molykote wasn't even originally designed for watchmaking use!
Brands such as Breitling and Rolex have since rejected and discontinued using Molykote. As of the late, the reasoning is because it contaminates the cleaning solutions.
Molykote DX paste is a mineral / lithium based white grease suited for long-term lubrication for metal parts and assemblies. Recommended by ETA for lubrication of movement calibers 251.262, 251.272, etc. This grease has been said to be similar to the popular Moebius D5 but with a less fluid viscosity. Molykote DX paste was originally designed for Sliding surfaces and friction contacts exposed to heavy loads, requiring "clean" lubrication, especially at low to medium speeds. Used successfully, for example, on many friction contacts of electrical and domestic appliances, packaging and office machinery, precision instruments, machinery in foodstuffs and beverages industry, as well as in textile and plastic processing machinery. But its versatile properties have proven to work well on many types of watches including certain applications in mechanical chronograph systems and the aforementioned ETA calibers. Made in Germany.
The Art of Oiling in Watchmaking - Lubrication 101 — NO BS WATCHMAKER
-
"Let me know who has "a good" one at those prices???"
My 162xx cases came from watches that had been stripped for their movements. They were relatively 'cheap' when I bought mine (around $150USD) and now the cases are a LOT more on eBay, Chrono 24 etc because of the insane escalation in rolex prices. Besides that, many of these cases are 25 or 30 years old now and rotted out by corrosion. All but one of mine are in 90% condition. Also have one machined to accept a rolex 3035 or ETA 2836.
So...imho $300 to $400 USD is a reasonable price today for a 162xx case in good condition that probably needs detailing.
Back when I first bought the cases they were easy to find because 'pickers' were buying 162xx DJ and 152xx OPD at watch shows by the dozens just to get the movements. They sometimes stripped them down on the spot and sold the cases/bracelets/dials and put the movements in clear plastic movement cups to take with them. That is where I got most of mine. The movements ended up in fully signed, near perfect 18K DJ cases/bracelets/dials and were resold. Some of the movements were converted to Day-Date and sold as Prez models and a few were converted to 18K submariners. One guy I knew back then already had 50 or more watches in a box that he had bought when I talked to him. This was in Orlando FL in the 1990s.
A watch/diamond trader friend got two of the converted 18KYG Prez watches with cal 3135 from 'a guy' in Miami FL without the seller or him knowing they were conversions. He finally got his $$ back. I saw a Prez conversion kit from date to day-date on eBay a while back and there is a 15xx to GMT conversion on there now. The GMT kit is incomplete (no cal ring spacer etc.) but it will make the conversion. It is better than what I used to put my 'shortcut 1655' together but the cost is about $1000 more.
GMT | 24 Hour | Conversion Kit | Fits Rolex Movement 1560 | 1570 With Date | eBay
3135 Rolex day date kit. Used parts rolex. | eBay
Another guy I knew was from another country and he sold signed fake 14K and 18K cases/bracelets/bezels etc for years at shows and by telephone 'on memo'. On memo = if he knew you, he sent the parts and you paid for them in 30 days or less. He also sold tutone conversions to change a steel DJ/OPD over to steel/14K or 18K...dial, crown, bezel, and bracelet. Tutone was hot back then.
Funny story about him...he had a retail store (in NYC iirc) and the Feds raided it and took every rolex watch and rolex part they could find, tore the place up, and charged him with a half dozen felonies. When he went before a judge to plead his case, the guy had a Hot Dog lawyer plus a 'rolex expert'. The Hot Dog talked the judge into allowing the expert to examine the watches etc. that the Feds had confiscated.
It was all 100% genuine! The dumb azzed Feds had scooped up all genuine watches and parts while throwing boxes, furniture, tools, show cases etc. everywhere. The fake stuff was somewhere else.
The guy sued everyone involved, I do not know how he came out on damages etc. but he got his stuff back. Most of it anyway.
The Feds got the last laugh though. They banned him from entering the USA because of being charged with the felonies, even though the charges were dropped, and when he arrived back in the USA from an overseas trip, they took his passport and shipped him right back out. Have not heard of him being back in 15 or 20 years.
I put the last 14K OPD bezel from him on a drowned tutone case/bracelet I sold as parts/junk about five years ago (with full disclosure about the bezel swap). It had been stored for a long time full of water (cal 3035) before I got it and the SS/18K oyster bracelet looked like a bicycle chain. The 18K bezel was just about the only good part on it. Paid $400 for it, sold it for $400, got a better bezel. One of my Bigger Deals.
A famous watch buyer/seller/trader once told me:
"If you want to retire with $1 million worth of watches...start out with 3 or 4 million dollars."
J3/amc
-
-
Since a replica is a replica no matter what, maybe a builder might look for a good genuine 162xx case for $300/$400 rather than go with a $600/$800 higher grade replica case. No one will ever convince me a $700+ replica case is much better than the average $50 to $100 replica case although the higher $$ cases have been detailed and have good numbers and letters.
You could leave the lug holes as is and just use genuine spec spring bars to preserve the value of the case. A later 162xx case with blind lug holes would need to be drilled all the way through. My 16220 case is an L serial number from around 1989.
Here is a thread from 14 years back about using a rlx 16234 case for a '1016' project. After finishing this project 'Stilty' sold me his leftover '1016' dials when he left the replica hobby and one of them is in my '1016' pictured above. He also sold me the leftover '1016' bezels he had cnc machined in a custom fabricating shop in Canada...the 316L stainless bezels are identical to genuine 1016 bezels. All of his projects were first class, he was the 'Rolojack' of the forum back then and I still have a 15200 OPD that he put together with genuine case, dial, hands, calendar ring, crown etc with a nos 12892 ETA in it. I'll dig it out sooner or later and post some pictures of it.
The hands were modified to fit and a genuine rlx 3135 date wheel was used because they turn the same direction as an ETA 28xx. The only way anyone could tell it is not 100% genuine without opening it up is the time sets ahead by turning the crown counterclockwise where a 3135 turns clockwise.
A few pics of my very first vintage Franken project - The Rolex Area - RWG
bidfun-db Archive: Watch Movements: Eterna 12892 (ETA 2892) (ranfft.de)
"Hopefully the mods will help you get into your Automatico login! I am sure we all know you are Automatico!"
I am still looking for my amc PW. I have a metal candy box with all my PW in it from the past 25+ years and can't find it...it also has my AOL dial-up PW in it!
Anyone remember when TimeZone com came to the USA from Singapore? That's when internet 'watch talk' really took off.
Maybe the PW fell into my 'A21' parts junk...
"You have mail!"
-
Picture 3 heading should read:
Genuine 16220 case with case tube:
Can not edit posts. Maybe I can find my 'automatico' PW and change back. Found a couple ETA 955.xxx movements lost since 2002 but can't find my PW.
Have an empty 160xx case for cal 3035 somewhere and if it shows up, I'll measure it and post the results.
J3/amc
-
In 2008 (iirc) I stuck a '1016' together using this 16220 case and a 1570 movement with genuine dial. I took it apart soon after but still have the case. Also have a few unsigned replica '16200' type cases so I compared the two.
Q...Why?
A...So if anyone is going to put a '1016' together this shows two options.
Cases side by side:
The replica 'DJ' and modern replica explorer cases are the same depending on if made for 2824 or 2836 akaik. The lugs on this replica have no holes and the early 16200 case had holes and has been drilled out to 1.25/1.30mm.
This replica case is made for ETA 2836 but many are made for ETA 2824, JMB '1016' for example. All genuine 16200 had cal 3135, a 3035 will not fit.
This 16220 mid case is 35.3mm wide and the replica case is 35.5mm wide.
The 16220 mid case is 5.0mm thick and the replica case is 6.05mm thick. My JMB mid case is approximately 5.0mm +/-, it is hard to measure with it all put together. The 2836 cases are about 1mm thicker than 2824 cases. You can see the difference in them below the rounded side of the mid case and a small non rounded area where the case back meets the case.
The 16220 bezel is 34.7mm OD...it is an ST bezel cut to fit a GS 22 crystal. The replica bezel is 35.3mm OD...it came on the case. The case neck on the replica is OEM spec and the bezel will have to be machined to fit a 25-22 OEM spec 1016 crystal.
The 16220 case with GS 22 crystal is 13.25mm thick. The replica case with sapphire crystal is 12.65mm thick and a GS 22 will add about .5mm +/-. My JMB case with a GS 22 is 13.0mm thick.
Rule of thumb:
A genuine 16220 case will work with a 2824 and a genuine 16000 type case will work with a 2836...no guarantees.
Lug space on this genuine 16220= 20.04mm, this replica case = 20.05mm.
Genuine 16220 dial seat OD = 28.0mm. Dial seat ID = 27.5mm. Genuine 16220 will work with 1016 genuine spec dial.
Replica case dial seat OD = 29.6mm, ID = 27.5mm so a case with a 29.5/29.6mm dial seat should accept an oem spec 27.9mm dial for a 1016 project but you will need the dial and movement mounted securely.
From an earlier post:
Case necks on 16xx, 16xxx, 162xx DJ and 1016 are 29.5mm OD.
Bezels for 16xx, 16xxx, 162xx are 30.4mm ID.
Bezels for 1016 are 31.0 ID.
Dials for 1016 are 27.9mm OD, same as 36mm QS DJ.
Genuine 15220 case with case tube:
Replica case without case tube. You can see the extra thickness below the rounded mid case where it contacts the case back.
My JMB '1016'
Typos are free.
J3/Amc
-
"Just where to buy one?"
Since Omega has stopped selling all but a few parts to 'unauthorized' repair shops and parts supply houses, movements are very hard to find and high $$. For this reason, I would consider a regular ETA 255.xxx as long as it fits Ok in the case. The hands will fit but I do not remember if there were any issues with the new movement being too thin or anything else.
Since the watch is 20+ years old and not a collector item the different movement will not hurt the value very much.
As far as that goes, an ETA 955.xxx might also work and they are a lot less $$. Just be sure to get one the same size and date offset as the original movement because 955.xxx movements come in 10 1/2L and 11 1/2 L sizes. The ETA/Omega 1438 is 2.5mm thick same as an ETA 955.xxx and a regular ETA 255.xxx shows to be 2.45mm thick. Not enough difference to matter.
There are quite a few parts supply houses listed on the internet that will have new ETA movements...Cousins in the UK for instance.
"Even paid £350 (?) to have it 'serviced' they then quoted £1000+ to repair the watch I bought new for $1000."
They sound like a gang of crooks. I've 'serviced' quite a few ETA 255. and 955. movements and the only hard thing about it is lining the step motor pivots up in the plates because of magnetic attraction.
Many/most repair shops today have so much overhead that they have to 'steal' $$ from customers to survive. That is their problem, not yours.
Imho the motto of most of today's watch repair shops should be 'Rob 'em and Rape 'em with a Smile.' Ha!
What you need is someone who can do the work at a reasonable price and does not try to make a month's pay out of a two or three hour job.
Other than finding an original Omega movement, the movement swap is very easy. Maybe ask friends, family etc. if they know a retired watch repair guy who still does repair work at home.
-
1
-
-
Welcome to the forum!
Stick around, don't just 'hit and run'.
I had an Omega 'Pre SMP' back in the 1990s with an Omega 1438 aka ETA 255.461 that would stop now and then so I put a regular ETA 255.xxx in it. Can't remember the last 3 digits but the only functional difference was the replacement had a conventional date setting method where the date in the 1438 flipped over by moving the hour hand.
Do not know the difference between an Omega 1538 and 1438 but the 1438 is a 10 1/2 ligne (23.3 mm) movement and all the other ETA 255.xxx I have listed in a catalog (255.421, 255.462, 255.465, 255.495) are also 10 1/2 ligne size. 1L = 2.12mm.
They all are at or above $100 and the 255.462 is $125. My catalog is from November 2020 so the prices have probably changed since then.
Btw, there are two used 1538 on eBay...one for $295 and one for $478. (!!!)
Good luck!
From: Omega caliber 1438 » WatchBase
Brand: Omega Reference: 1538 Base: ETA 255.461 Movement: Quartz Display: Analog Diameter: 23.30 Jewels: 6 Reserve: 26280 Date: Date Hands: Hours, Minutes, Seconds Additionals: Chronometer
Omega caliber 1438
Brand: Omega Reference: 1438 Base: ETA 255.461 Movement: Quartz Display: Analog Diameter: 23.30 Jewels: 6 Reserve: 26280 Date: Date Hands: Hours, Minutes, Seconds Additionals: Chronometer
-
"I'd figure the big question is can you fit a plastic crystal to a rafflesdials.com explorer case? I'd think it can be done with a little bit of work. And a few plastic crystals!"
Case necks on 16xx, 16xxx, 162xx DJ and 1016 are 29.5mm OD.
Bezels for 16xx, 16xxx, 162xx are 30.4mm ID.
Bezels for 1016 are 31.0 ID.
Dials for 1016 are 27.9mm OD, same as 36mm QS DJ.
So...a case with a 29.5mm case neck and dial seat that will accept a 27.9mm dial should work for a 1016 project.
No guarantees and I'll check a few cases tomorrow and make changes if there are mistakes.
J3/Amc
-
Model 1003 from early 1960s...
Case is 34mm, cal 1560, Yuki dial, ST hands, GS crystal.
I've posted this one before iirc, ran across it when hunting for the AKs.
One Air-King (!) and one Air-King (?)
Upper one is 100% a genuine 14000M with 3130 and the lower one is a replica '14000' with swiss ETA 2836/sapphire.
The nos replica 'AK' has a 36mm case with 20mm hoods and the slightly used genuine AK has a 34mm case with 19mm hoods.
The replica keeps time as close as the genuine model and the running reserve is about the same.
Do not know what made the zit at 49 min, the bezel is fine. Posted the 14000M before, please excuse the ratty pics.
Nos Daffy Diver from 1994.
Daffy Duck was 'born' in the late 1930s.
J3/Amc
-
2
-
-
Here is the post on my JMB '1016' project:
JMB '1016' project update... - The Rolex Area - RWG
J3/Amc
-
-
"There are no out of the box 1016 or any decent vintage Rolex. Your best bet is get a modder to build one or build one yourself."
Good advice!
After sticking a few together, here are a few things to look for if you decide to chase the parts down and put one together:
1...Decide on the movement first. Try to go with an ETA that has a beat rate close to a 1016. ETA 2846,2879 etc are 21600 and they are fine for these projects. Rlx imvts are18000 for older models and 19800 for later 15xx mvts.
2...Look for a thin case but one that has enough metal on the lugs to drill the spring bar holes out to 1.25/1.3mm without the holes being too close to an edge.
3...Make sure the case will accept the movement you decide on. Day-date ETAs are thicker and you can get in a mess with them in a case made for thinner ETA date movements .
4...Make sure the case will work with the dial you choose. Some cases are not oem spec for dial OD but most of the better aftmkt dials are oem spec.
5...A standard DJ bezel will not work with an oem spec 25-22 1016 crystal because the crystal sidewall is thicker. You need a 1016 spec bezel.
Figure on a lot of details cropping up:
Many newer cases have a 5.3mm case tube and a modern 6.0mm crown. Make sure you get a matched set, especially if you go with genuine part$.
You will probably need a movement spacer. Figure on using case clamps and screws.
No plastic spacers if you can help it. Etc, etc.
Here is a super nice 1016 project:
SOLD - 1972 Rolex 1016 Explorer - Watches - RWG
Crown Info... - The Rolex Area - RWG
I posted about putting an ETA 2824/2846 'combo' movement together a while back for my '1016' but did not save the link to it. I used a JMB case but needed a slower beat 2824 type movement.J3/Amc
-
You left out some important details:
1...Is the watch genuine or a replica?
2...Is it a true chronograph or a time/date setup with a chinaclone 2892? Some replicas are made this way.
3...If it is a replica, does it have an ETA 2892/94 for sure or an Asian or swiss 7750? Some have modified S/A 7750.
Very few replicas used a swiss ETA 2894-2 with a DD chrono module.
New 2894-2 will sell for $500 to $1000 now from supply houses depending on grade and their markup.
To answer your question...yes, a genuine 2892/94 rotor should work on any standard genuine ETA 2892/94. If the movement is a replica, a genuine rotor might or might not work. I never tried it.
Catch 22...You may need a special tool to r/r the rotor, maybe not.
How does one remove the rotor on an ETA 2892? - Watch Repair & Upgrade - RWG
Rotor Removal - Watch Repairs Help & Advice - Watch Repair Talk
1801 info:
Genuine...Hublot Big Bang In-depth Review (timeandtidewatches.com)
J3/Amc
-
-
No wristies today, only piccies.
Why?
Because it's easier.
Like new Universal Geneve Polerouter with micro-rotor from late 60s/early 1970s ...
Bought this UG 30 years ago new for $60 from a watch trader.
Glycine single crown manual wind Compressor...
Stainless 1950s/60s Longines manual wind with glass crystal...
Stainless 33mm 1940s Longines military type with Hot! radium dial.
Hands may have been changed. New cloth strap.
J3/Amc
-
1
-
-
"For this watch case, i need a meters first mk2 or 3 red submariner dial and a good 1570 movement which is impossible to get cheap."
After you get it finished and running with an ETA, be on the lookout for a rolex 1500 etc. watch with a 1575. Look for a rough case and dial with a good movement. The last rolex 1500 I bought was $700 on 12-14-21 and the case was pretty good, the dial had been refinished, but the movement was fine. It came from a jewelry store and a friend of the store owner got it for me. I gave him $100 on the deal so the watch was really $600 from the store. Since I do not know the store owner, he made the deal.
Some of the best deals I have landed in watches came from pawn shops, jewelry stores, watch traders, car shows (!), and watch shows. Problem is the internet has made buying watches at a fair price like going back in time to the Bonnie and Clyde days wearing a suit made out of $100 bills. Good watch deals are hard to find now without getting robbed because everyone with a watch to sell is a Shake and Bake internet watch expert.
An old time watch trader told me:
"Do not wear a rolex when you are looking to buy a rolex."
"Take a watch or two to trade but keep them out of sight at first."
"Play dumb, but not too dumb."
J3/Amc
-
"How is that J$W case compared to say a phong?"
J$W = Jewelry & Watch = Phong.
"I have A phong now and it’s not accepting my genuine 1570/75 movement."
A genuine rolex 1565/75 GMT movement and oem spec dial will fit into my J&W case and I noticed where the case has been scratched inside where the casing screws are located. My guess is the previous owner was using a 'shortcut' GMT 15xx movement and this caused the movement not to fit as it was meant to. A genuine 1565/75 GMT movement has a slightly thicker calendar ring (spacer) making the movement a little bit thicker than a regular 15xx date movement. Sometimes case clamps with screws must be used in place of regular casing screws that mount inside the groove in the case. I have needed to do this in a few projects using rolex 15xx movements with aftmkt cases.
Try your 15xx GMT movement with an oem spec dial in your case without casing screws and see if the dial goes all the way down inside the case and fits against the dial seat. If it goes into the case Ok, check where the casing screw heads would be and see if it looks like the screw heads will fit inside the groove or need to be above the groove and use case clamps. The GMT calendar ring is 1.0mm thick and a regular calendar ring is .9mm thick. The .1mm will make a difference if the case is machined exactly same as genuine.
Look at the eleventh post on page 1 about case screws/clamps:
Building an MBW Sub + 'shortcut' rlx 1560/70 GMT conversions... - The Rolex Area - RWG
J3/Amc
-
1
-
-
Rules of thumb...
An ETA 2824 will usually fit into a genuine rolex case made for a 3135 or a four digit case made for a 1520/30/60/70 no date movement.
An ETA 2836/46 will usually fit into a genuine rolex four digit case made for a 1570/75 date movement.
Rolex 15xx, 30xx, and 31xx movements are larger in diameter than ETA 28xx so a spacer is usually needed.
No guarantees.
Free advice...
Do not waste a genuine 1680 case on a 'Frankenstein replica' project if it involves modifying the case at all. Save up for a genuine 15xx date movement and dial, even a ratty dial will do.
Example...
I have a genuine rolex 1570/75 date movement with an original 'Mk 1' Lemrich 1680 dial, but no case. Lemrich dials are very hard to find now and are going for $4000+. The movements are relatively easy to find and the cases are very hard to find so I am a looong way from a 1680.
That's why I have an MBK '5512' with an ETA to wear now and then if I get the 'submariner itch'. Meanwhile the rlx 1570/75 and Lemrich dial are stored in a DW '1680' case to protect them.
J3/Amc
DW/Lemrich/1575...fifth post from the top:
Rolex Wristies thread - Page 139 - The Rolex Area - RWG
The MBK '5512' is post 19 on the same page.
Here is an example of a 1680 with a 'Mk 1' Lemrich dial:
SOLD - Rolex Submariner ref 1680 mk1 from 1977 | Omega Forums
-
Thanks!
It's good to be missed.
-
"Are you sure that are gen the dial that have the space between indices and rehaut?"
There is no way to know for certain if some the dials with the space between the outer markers and edge of the case are genuine. With replica/refinished dials being so good now, I guess it will remain a mystery. I am not an expert of any sort, especially on dials but I can't help wondering about this 'major' differences in supposedly genuine vintage dials. I understand there are always 'minor' differences but the space between the outer markers and case edge seems like a 'major' difference. I guess part of the mystery is why the 'experts' ever mention it.
The Vn dial on your watch above is very good and the space between the markers and case edge are because of the dial/movement being mounted to one side a tiny bit and I see this quite often on genuine and replica examples.
Here is where I looked at the genuine 1655 dials:
images of rolex explorer 1655 - Bing images
The images change over time but there is usually one with space between the markers and case edge (all the way around the dial) claimed to be genuine. I looked at 50 or 60 tonight and did not see any with the space .
Next month there might be one.
"The most evident gap that I remember was visible on the old cartel 1655."
I still have a couple from 2005 or so and they both came in cases marked '1680' with new (at the time) swiss ETA 2836 with non-adjustable Asian 24H mod.
Here is a pic of one, still 'nos'...
Flatten the CG tips, scuff it up a bit, and it might 'wow the troops' at the Waffle House...after 2am.
-
1
-
Still no 1570 or 1520 Movement clones, right?
in The Rolex Area
Posted
If someone wanted to make a batch of good quality 19800 or 21600 bph movements with the same hand sizes, date position, and dial foot location as a 15xx rlx (with quick set) it would probably sell. It would not have to look like a rlx, just act like one. Also make it quick set without a 'click' in the date setting position, just find the date set position by feel and make it hack or not hack by removing the hack lever like an ETA.
Make a GMT too!
I can't remember having an ETA 2620, I'll hunt one up.
17jewels.info: ETA 2620R