Vibes

I am trying to make a ranger that is very accurate. My only missing piece is a minute hand that is 10.5 - 11 mm long like in the pic below. Do you know where I can find one? A submariner one goes up to the chapter ring.

Mine says hi, same recipe. Mine says hi, same recipe except for HR hands

I have done it a few times, the best tool to get is a stereo microscope. The paste dries very quickly, keep it plyable with thinner.

There is only one way to find out 10 sec may take half a knotch.

Killer! nice work!

This is great info Automatico. Thank you very much! I will buy up some crystals, most are cheap enough. I also have the original Yuki crystal, but it is not high quality.

Thanks alligoat. I have ordered some new crown gasket as well. I will replace the crown gasket and dry out the watch before sealing it back up. I glued in the crystal quite well, so maybe I will get a pressure test after that. I have a set of calipers, so knowing the measurements of the different crystals will save me from having to just buy a bunch to try them out. The 25-123 is designed for a 34mm tudor and has the date window in the correct place. There is also the 25-141 and 25-125 and possibly others.

Hi there, I have finally finished my ranger project and I am getting a little fogging under the crystal when washing dishes. I am wondering if there is moisture still in there from when I cleaned the threads for a new case tube with alcohol/ water. Anyway, the crystal is a Clark 25-123 and wasn't a very tight fit in the first place. I sealed it with crystal cement. The case is a Yuki 74000. Is there a better fitting crystal I should be using? Is there a chart with the measurements of the different crystals?

Incredible work!

Beautiful!