pollux1 Posted December 5, 2009 Report Share Posted December 5, 2009 Hi all, I have an ETA 6497, recently serviced. It was bought recently and it seems the screw retaining the ratchet click came loose during transit, I tightened it but it still won't stop itself from unwinding. Any help is hugely appreciated. Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted December 5, 2009 Report Share Posted December 5, 2009 I would say that with out seeing it that the click spring is out of position and thus not pushing the click into position to block the winding wheel. A simple fix, but you have to make sure you put the spring in the right way round. I f you can post a close up photo we should be able to confirm it Quote Link to comment Share on other sites More sharing options...
pollux1 Posted December 5, 2009 Author Report Share Posted December 5, 2009 Hope this helps Andy. Quote Link to comment Share on other sites More sharing options...
pollux1 Posted December 5, 2009 Author Report Share Posted December 5, 2009 I removed the click screw and repositioned the spring but it just won't stay in place, is there a knack to it? Thanks Andy and all for taking the time to read and reply. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.