jitai Posted January 18, 2010 Report Share Posted January 18, 2010 (edited) Hi, I recently installed a Chief's cyclop with AR for one of my A series PAM project . The mag power is very good but the hue from the AR stand out loudly as compared to the crystal with AR stripped. This is incorrect for an A series model. Can anyone suggest any method that will get rid of the cyclop AR? Hope the expert can chime in and of course it will be nice if chief is reading my post and advise. Thanks all Edited January 18, 2010 by jitai Quote Link to comment Share on other sites More sharing options...
sander Posted January 18, 2010 Report Share Posted January 18, 2010 buffing machine will take care of it. Quote Link to comment Share on other sites More sharing options...
jitai Posted January 18, 2010 Author Report Share Posted January 18, 2010 buffing machine will take care of it. ThanksHas anyone tried this before with good result? Appreciate advise and comments. Thanks Quote Link to comment Share on other sites More sharing options...
HauteHippie Posted January 18, 2010 Report Share Posted January 18, 2010 Hi, I recently installed a Chief's cyclop with AR for one of my A series PAM project . The mag power is very good but the hue from the AR stand out loudly as compared to the crystal with AR stripped. This is incorrect for an A series model. Can anyone suggest any method that will get rid of the cyclop AR? Hope the expert can chime in and of course it will be nice if chief is reading my post and advise. Thanks all Hi j... First off I'd say that I'm surprised you say it stand out loudly. I have a couple of these on my own watches and can't see any hue unless I have it directly under strong flourescent light. I'd say take a better look under normal everyday conditions before you decide to remove it. Anyhow if you do remove it, I'd suggest mounting it on the crystal first, and then buffing it off with rouge or the like. Good luck! Quote Link to comment Share on other sites More sharing options...
PeteM Posted January 18, 2010 Report Share Posted January 18, 2010 Hi, I recently installed a Chief's cyclop with AR for one of my A series PAM project . The mag power is very good but the hue from the AR stand out loudly as compared to the crystal with AR stripped. This is incorrect for an A series model. Can anyone suggest any method that will get rid of the cyclop AR? Hope the expert can chime in and of course it will be nice if chief is reading my post and advise. Thanks all Surely before you waste a Chiefs AR on cyclops you should think about selling it and replacing it with one without AR, its sought after as I understand he no longer does this. Not saying I want it though but I am sure others would welcome the chance to buy Quote Link to comment Share on other sites More sharing options...
jitai Posted January 19, 2010 Author Report Share Posted January 19, 2010 Hi j... First off I'd say that I'm surprised you say it stand out loudly. I have a couple of these on my own watches and can't see any hue unless I have it directly under strong flourescent light. I'd say take a better look under normal everyday conditions before you decide to remove it. Anyhow if you do remove it, I'd suggest mounting it on the crystal first, and then buffing it off with rouge or the like. Good luck! Thank you chief. I think the line "stand out loudly" was used incorrectly. Sorry for the wrong choice of words. The situation is what you mentioned above. The pink / purplish hue are seen only directly under flourescent light. Can I PM you some pic for further advise? Thanks again chief Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.