siesta181 Posted February 20, 2010 Report Posted February 20, 2010 As requested.... POst em if you've got em... Cheers S181
Eton Posted February 21, 2010 Report Posted February 21, 2010 Oooooh, that's HOT!!! Thanks for sharing, wear it well!
hiker01 Posted February 21, 2010 Report Posted February 21, 2010 @siesta181......you're da man! Thanks for starting this thread! Finally found a source for the hands.......and you know who! Thanks all! Great/excellent pieces! Hopefully mine come out looking as good as these ruggedly and rare handsome pieces! Here it is with a borrowed pair of hands:
lanikai Posted February 21, 2010 Report Posted February 21, 2010 My 202A It is being redone with PreV lugs and an upgraded PreV CG AC/Lani
deniz21 Posted February 21, 2010 Report Posted February 21, 2010 come on guys there must be more of the prev 4 liner MM show us these beautys
hiker01 Posted February 21, 2010 Report Posted February 21, 2010 My 202A It is being redone with PreV lugs and an upgraded PreV CG AC/Lani Hey Lani! Looking good! What do you mean by "redone"? Are you replacing the case? Where did you source your PreV CG? Thanks for any info you could share! Hike
lanikai Posted February 21, 2010 Report Posted February 21, 2010 Hey Lani! Looking good! What do you mean by "redone"? Are you replacing the case? Where did you source your PreV CG? Thanks for any info you could share! Hike The case that Ubi gifted me is so good .. no dimples.. it need to be technically correct, so I'll have the lugs drilled to accept the PreV screws.. and I have the LH CG to add.. so I'm having the pvd done over so the CG and the lug screws will match.. PVD can be temperamental with different coatings, and understanding this.. I decided to redo the project.. the CG that is in the pic is good for the H series but I need the Historic CG and the PreV lug screws, that being with the little screws to secure the bar at both ends of the lugs..
hiker01 Posted February 21, 2010 Report Posted February 21, 2010 The case that Ubi gifted me is so good .. no dimples.. it need to be technically correct, so I'll have the lugs drilled to accept the PreV screws.. and I have the LH CG to add.. so I'm having the pvd done over so the CG and the lug screws will match.. PVD can be temperamental with different coatings, and understanding this.. I decided to redo the project.. the CG that is in the pic is good for the H series but I need the Historic CG and the PreV lug screws, that being with the little screws to secure the bar at both ends of the lugs.. Thnks for the insight, Lani! Excellent info!
siesta181 Posted February 22, 2010 Author Report Posted February 22, 2010 @hike: No worries mate. These 202a 4-liners are perhaps the best looking PAMs ever. There is never a bad time to show em off.
siesta181 Posted February 22, 2010 Author Report Posted February 22, 2010 Stunning pics Andei... especially the last one. Richemont needs to hire you as their photographer
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now