Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Where to source an ETA 2824-2 with H4 CP?


cougaree

Recommended Posts

Guys,

Do you know where I can source an ETA 2824 movement with H3 or H4 cannon pinion? I have been looking for a while, the only ones I can find are with standard CP. I don't mind to have the taller CP installed on a standard movement, but the taller CP seems hard to find.

Thanks and happy Easter!

Link to comment
Share on other sites

Guys,

Do you know where I can source an ETA 2824 movement with H3 or H4 cannon pinion? I have been looking for a while, the only ones I can find are with standard CP. I don't mind to have the taller CP installed on a standard movement, but the taller CP seems hard to find.

Thanks and happy Easter!

Doesn't the 2836 have longer parts you could use in the 2824? - if you have a spare old movement lying around.

Link to comment
Share on other sites

Really? Will it be a H3 or H4?

Thanks!

I think the ETA website should be able to tell you the standard heights, and available heights for each movement, and which parts are interchangeable. The documents are here:

ETA Service Portal

EDIT to add: the 2836 is 0.45mm thicker between the crown and dial than the 2824, to allow for the day mechanism. Logically it would seem that the pinion etc, should be 0.45mm longer.

Edited by Luna
Link to comment
Share on other sites

See page 6 of the documents called 'Technical Communication'. There is one of these for each movement.

The 2824 uses the H1 to H6, with H2 being standard.

The 2836 uses H3 to H6, with H4 being standard. H1 and H2 would presumably be too small to allow for the day mechanism.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up