DuDro Posted May 19, 2010 Report Share Posted May 19, 2010 For those that either own or have handled the gen Pro Diver Rubber strap... Does the thickness of the strap taper from the lug end to the tip on the long side of the strap? Just curious since none of my rep straps fit well when used with the rep DLC buckle. Link to comment Share on other sites More sharing options...
PAMman Posted May 19, 2010 Report Share Posted May 19, 2010 Don't know but I will check as I have 3 gen straps. Will report back. Link to comment Share on other sites More sharing options...
DuDro Posted May 19, 2010 Author Report Share Posted May 19, 2010 Awesome...thanks for your time and efforts! Link to comment Share on other sites More sharing options...
Bike Mike Posted May 19, 2010 Report Share Posted May 19, 2010 Hmmm...Black one does not thin...Pre 2008 Blue one (Post 2008) thickens from .135" at the tang to .180 at the lug. Can .045" cause that much of a problem? Link to comment Share on other sites More sharing options...
DuDro Posted May 22, 2010 Author Report Share Posted May 22, 2010 Don't know but I will check as I have 3 gen straps. Will report back. Hey bud...what's the verdict? Link to comment Share on other sites More sharing options...
Tom Hawkes Posted May 24, 2010 Report Share Posted May 24, 2010 (edited) I have two gen Pro Diver straps. Both Black, one is the older model, one the newer one with the raised logo on the buckle. Both taper from the lug end to the tip. It seems as if the newer one tapers a bit more than the old one. If the strap and not the buckle is your problem, just try to get the gen strap. They were sold for around 80 Euros at the AD but since the new version without the lettering came out they can't be ordered anymore directly from B. So if you are lucky the AD has some on stock, otherwise check the Bay. Edited May 24, 2010 by Tom Hawkes Link to comment Share on other sites More sharing options...
jjenk Posted May 25, 2010 Report Share Posted May 25, 2010 The rep strap is just a tad wider at the end than the gen so it doesn't sit correctly in the buckle. The gen strap will fit perfectly in the buckle. Link to comment Share on other sites More sharing options...
Panther917 Posted May 26, 2010 Report Share Posted May 26, 2010 A little late to the thread but: Link to comment Share on other sites More sharing options...
gtanak Posted May 26, 2010 Report Share Posted May 26, 2010 Even later i have arrived - But only cos i just received my Gen from Dani .. Thanks Bro! I have 3 other measurements in btw, let me know if you need em Hope this solves your question once and for all BTW, the inner measurement for the buckle is 20mm Link to comment Share on other sites More sharing options...
PAMman Posted May 30, 2010 Report Share Posted May 30, 2010 Hey bud...what's the verdict? Sorry, I had forgotten about this. Yes, the gen straps are thicker at the lug end and get thinner along their length. Link to comment Share on other sites More sharing options...
Tom Hawkes Posted May 31, 2010 Report Share Posted May 31, 2010 Haha nice.. Guys I'm pretty sure it was about the thickness of the strap tapering down. Not the width. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now