fulanito_uk Posted May 28, 2010 Report Share Posted May 28, 2010 Hello all, I have a major problem... I think i killed my pc, the specs are below: Processor: AMD Phenom II 965 Processor Interface : Socket AM3 Memory: Major Brand 4gb DDR2 800 PC6400 CL6.0 Memory Module Hard Drive: Branded 1tb Sata 7200rpm 16mb Cache HDD Graphics Card: GTS 250 1gb Motherboard: Asrock K10N78 Full HD-HSLI AM2 5200MT/S Nvidia 8200 Chipset SKT AM2 Max Memory Support: 16gb DDR2 1066 Motherboard Expansion Slots: 1x PCI-E 16x, 1x PCI-E 1x, 2x 32-bit PCI Power Supply: Branded 450w 24Pin Power Supply Unit Thought i was updating the bios to work better with my new CPU (which was working perfectly should have left it as it was) but the item I downloaded from the offical ASrock website seems to have killed my pc!! While there is no smell of burning and all fans, lights, dvd (open and close) are working, there is no signal to my monitor?! and doesn't seem to be booting up. Tried the jump thing with the pins no change and did the CMOS battery thing no joy... what the hell have I done?!?! and what can i do to get it running again?!? Thanking you all in advance!! with every thing crossed!! Link to comment Share on other sites More sharing options...
AmStaFF Posted May 28, 2010 Report Share Posted May 28, 2010 try to start the PC without the Graphic Card Link to comment Share on other sites More sharing options...
Mickey Padge Posted May 28, 2010 Report Share Posted May 28, 2010 You may be able to recover flash via a floppy disc with a force flash command, but for that the BIOS's boot sector must still be in place, does it search for a floppy if you boot? Check the mobo manufacture to see if they support this, it involves putting an auto execute .bat command file onto a boot floppy, including the dos flash program and the correct BIOS file, it is usually just a few lines of text, nothing difficult...... Link to comment Share on other sites More sharing options...
fulanito_uk Posted May 28, 2010 Author Report Share Posted May 28, 2010 no floppy drive... just dvd?!? ummm was thinking about this would it work? http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=380188672812 will try the graphics card but how will i know if it worked if i can't see the screen? Link to comment Share on other sites More sharing options...
Mickey Padge Posted May 28, 2010 Report Share Posted May 28, 2010 You need a floppy drive, motherboards will seek for a floppy if they can upon post, and the auto execute file will run the flash for you, usually you would leave it for 15 minutes to see if it worked, then re-boot, you can hear if the floppy drive is doing something or not You would not need to see the screen with this BIOS recovery method Link to comment Share on other sites More sharing options...
AmStaFF Posted May 28, 2010 Report Share Posted May 28, 2010 will try the graphics card but how will i know if it worked if i can't see the screen? have you a Port for the GraphicCard on Your Board? or only on the Graphic Card self? edit: is this your Board? the Blue Port right on top is the GraphicCard Port Link to comment Share on other sites More sharing options...
fulanito_uk Posted May 28, 2010 Author Report Share Posted May 28, 2010 yes just tried it with out card no change!!! i'm such an idiot if it ain't brok don't fix it!!! do you think that chip would fix it? Link to comment Share on other sites More sharing options...
AmStaFF Posted May 28, 2010 Report Share Posted May 28, 2010 it is possible but no 100% guarantee Link to comment Share on other sites More sharing options...
fulanito_uk Posted May 28, 2010 Author Report Share Posted May 28, 2010 if not then a new mobo right?!?! thats all i need plop! Link to comment Share on other sites More sharing options...
Mickey Padge Posted May 28, 2010 Report Share Posted May 28, 2010 I don't know if you can just drop the new BIOS chip in with ease, also, do the sellers flash it with the correct BIOS for you first? Otherwise you are still in the same position..... An internal floppy drive is dirt cheap, and you may be able to fix the board via the recovery method I mentioned before, did you flash the wrong BIOS from within windows somehow? Most winflash programs would prevent incorrect BIOS flashes from ever happening, did you cut power during the flash, or did the PC freeze? Link to comment Share on other sites More sharing options...
fulanito_uk Posted May 28, 2010 Author Report Share Posted May 28, 2010 no it was the right bios from the offical site don't know what the hell happened, all finished well... please restart then nada!! uuufffffffff what an idiot!!! so its the chip, new mobo, or your floppy idea (just found one in my room funny enough) where do you think i can find out if i can download the flash thing for the floppy?? Thanks guysthe chip seems to be the exact chip from my mobo Link to comment Share on other sites More sharing options...
Mickey Padge Posted May 28, 2010 Report Share Posted May 28, 2010 Please let me know the full model and revision of your exact motherboard Link to comment Share on other sites More sharing options...
Utheman Posted May 28, 2010 Report Share Posted May 28, 2010 make sure you graphics card is seated properly all the way in the slot... Link to comment Share on other sites More sharing options...
fulanito_uk Posted May 28, 2010 Author Report Share Posted May 28, 2010 your a legend ASROCK k10n78fullHD-hsli k10n78fullhd-hsli r3.0/m/asr part no:90-mxg670-a0uayz Link to comment Share on other sites More sharing options...
Mickey Padge Posted May 28, 2010 Report Share Posted May 28, 2010 OK I will have a quick look here: http://www.asrock.com/MB/download.asp?Model=K10N78FullHD-hSLI%20R3.0&o=All Look familiar to you? Link to comment Share on other sites More sharing options...
fulanito_uk Posted May 28, 2010 Author Report Share Posted May 28, 2010 1.00 4/14/2008 Windows Link to comment Share on other sites More sharing options...
Mickey Padge Posted May 28, 2010 Report Share Posted May 28, 2010 OK hold on one second, I think I have the answer....... Link to comment Share on other sites More sharing options...
fulanito_uk Posted May 28, 2010 Author Report Share Posted May 28, 2010 lol..... Please read below information before download or update BIOS We don't recommend users to update BIOS while the system is running well. For any damages caused by improper operation of downloading or updating BIOS, ASRock Link to comment Share on other sites More sharing options...
fulanito_uk Posted May 28, 2010 Author Report Share Posted May 28, 2010 the dvd drives light flashs not sure if it reading it or not? Link to comment Share on other sites More sharing options...
Mickey Padge Posted May 28, 2010 Report Share Posted May 28, 2010 OK, have a read of this, your motherboard uses an AMI BIOS, which has a recovery option built in!: "BIOS Recovery AMI BIOS AMI has an embedded recovery technique in the 'boot block' of the BIOS. In the event that the BIOS becomes corrupt the boot block can be used to restore the BIOS to a working state. The routine is called when the 'system block' of the BIOS is empty or corrupt. The restore routine when called will access the floppy drive (1.44Mb floppy disk drive) looking for a file named AMIBOOT.ROM. This is the reason the floppy drive light comes on and the drive appears to be in use. If the file (AMIBOOT.ROM) is found it is loaded into the 'system block' of the BIOS to replace the corrupted information. To restore your BIOS copy the most recent version of your motherboards BIOS file to a floppy diskette and rename it AMIBOOT.ROM. The diskette does not need to be bootable or contain a flash utility. It will access the floppy from 2-5 minutes the system will beep four times. Remove the floppy diskette from the drive and reboot the computer. if when you turn on the system it does not try to access the floppy, press and hold the 'CTRL' and 'HOME' keys at the same time. This will force the system (assuming the 'boot block' isn't corrupted) to access the flopy and look for the AMIBOOT.ROM file. Note: 12345678.BIN represents the name of your BIOS. Step by Step: 1. Rename the desired AMI BIOS file to AMIBOOT.ROM and save it on a blank floppy disk. e.g. Rename 12345678.ROM to AMIBOOT.ROM 2. Insert this floppy disk in the floppy drive. Turn On the system 3. If no floppy access occurs press and hold Ctrl-Home to force update. Follow insructions on the screen and it will read the AMIBOOT.ROM file and recover the BIOS from the A drive. 4. When 4 beeps are heard you may remove the floppy disk. 5. Restart the computer." So it seems you just need an internal floppy hooked up, with a floppy disk with your BIOS file on it, I have attached the right file, just unrar it to a floppy disk, and see if it works AMIBOOT.rar Link to comment Share on other sites More sharing options...
Mickey Padge Posted May 28, 2010 Report Share Posted May 28, 2010 Should work, unless your boot sector is messed up, in which case buy a new chip, and have the seller pre-flash the correct BIOS for you first..... Good luck! Link to comment Share on other sites More sharing options...
fulanito_uk Posted May 28, 2010 Author Report Share Posted May 28, 2010 wow lets give it a try... and how about the Instant Boot ver:1.23 at the bottom of the driver page? Link to comment Share on other sites More sharing options...
Mickey Padge Posted May 28, 2010 Report Share Posted May 28, 2010 Don't know what Boot ver:1.23 is, I think it has nothing to do with your problem though By the way, if you want to buy a pre-flashed BIOS, have a look here: http://www.biosman.com/biosrecovery.html I purchased from them years ago for a messed up flash, where the boot sector was corrupted, the chip they sent worked a treat, strange I still had the link after such a long time Link to comment Share on other sites More sharing options...
fulanito_uk Posted May 28, 2010 Author Report Share Posted May 28, 2010 man.. looks like i'm going to have to get the chip and hope that that will work!! the disk isn't working I think i really screwed it up!!! but thanks so much for all your hard work!!! way and beyond the call!! where about in london are you? Link to comment Share on other sites More sharing options...
Mickey Padge Posted May 29, 2010 Report Share Posted May 29, 2010 Just in case, might be worth unplugging the power and removing the little button cell battery from the board for half an hour or so, that has brought some boards back to life for me Are you 100% sure the internal floppy drive works OK? If it does, the BIOS probably has a corrupt boot sector, any you will need a new chip.... I live in TW9 area Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now