Building gen Tudor sub stem problem.

[nick1972]

Hello,

I'm building 2 gen Tudor (7016 and 7021) subs and I have a problem with the stem.

I bought 2 regular Tudor watches with the right movement (2483 and 2484) for the subs but the stem is to short.

I read that the stem part is nr. 401 and it seems that al those old eta's uses the same type ref nr.401

When I look on ebay for stem ref nr. 401 I see there is alot of difference in calibernumbers between them so I'm very confused now.

Is ref. 401 fitting them all or what?

The stems from the 2483 and 2484 are the same and fit eachother.

Maybe I can use stem extensions but what size I have to use? Is it 9 to 9?

Stem from ebay:

http://cgi.ebay.com/Part-401-Winding-Stem-ETA-2836-2-2824-2-2801-2-Movement-/400153642637?pt=LH_DefaultDomain_0&hash=item5d2b04068d

Stem on the picture is my stem and looks different then the one on ebay:

Thanks for the help

[FxrAndy]

PPart 401 is what is listed with my supplyer as the correct stem, and is the same stem for the 2824/36 movement also, I have a bag of 5 here and they are 19.98mm long as new and under a loupe look like the one above, Are you in the EU pm me your address and i will save you the postage from cairo.