slickdick Posted March 22, 2006 Report Share Posted March 22, 2006 What tool is suitable for cutting a stem? tips and howto's very much welcome. regards, Job Link to comment Share on other sites More sharing options...
RWG Technical Posted March 22, 2006 Report Share Posted March 22, 2006 Always cut longer than needed, always cut longer than you need...very important point. Use side cutters, preferably sharp ones, and once cut, file the cut part down with a fine file until the threads are flush (the cutter will damage and crush the threads, if you try and thread it in the crown before filing, you will damage the crown threads). Insert stem, test fit in watch, and repeat if necessary, if it's only out a small length, file the extra off rather than recut with cutters, otherwise it will be too short (trust me on this one). RG Link to comment Share on other sites More sharing options...
slickdick Posted March 22, 2006 Author Report Share Posted March 22, 2006 Thanks for the valuable info The Zigmeister Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now