usmctowgnr Posted March 4, 2011 Report Share Posted March 4, 2011 I recently got a SSD V2 and want to do some mods. I have a gen 24-703 crown, tube, and a bk overlay I want to install. I would also like to get the crown guards done. I had thought of having the lugs drilled, installing old tritium dial and transforming it into a 16660 but I don't want all my rolexs to be vintage. I would actually like one to glow in the dark so I am gonna stick with a 16600 luminova model. I need some advice on upgrading the dial and insert. I would love to go gen but right now funds are low due to having alot invested in a few other Frankens. My question is, who/where to get an aftermarket dial and insert that is closer to gen than the stock one used on the ssd v2. Also, is there anything else that I should consider doing. Thanks Joe Quote Link to comment Share on other sites More sharing options...
grifter Posted March 4, 2011 Report Share Posted March 4, 2011 IMO the stock dial is only missing the thicker white markers at every 5 minute mark behind the indices and super lume. I don't know where to source another 16600 dial.. I honestly don't know where to get a better 16600 insert other than gen inserts. Just upgrade the pearl and I think it looks ok. Sub inserts don't fit the SD bezel... so I've been told. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.