agp Posted March 1, 2012 Report Share Posted March 1, 2012 The chrono pusher decided to come off one day without me doing anything to the watch. All the parts are there, including the spring. When I try to put it back on and turn the outer turner thing, it goes past the bottom of the pusher, showing grooves (you can make this out in the third picture). And it never stops turning. The pusher does not go all the way in. When it's on, it's longer than the bottom pusher. Does anyone know how to fix it? Quote Link to comment Share on other sites More sharing options...
1976 Posted March 1, 2012 Report Share Posted March 1, 2012 You will have to take off the movement and screw it from the inside. Quote Link to comment Share on other sites More sharing options...
Skywalker Posted November 17, 2012 Report Share Posted November 17, 2012 (edited) This happened to me too! Any suggestions? Edited November 17, 2012 by rolexian Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted November 17, 2012 Report Share Posted November 17, 2012 1. Remove the case back and the movement find the screw or clip that was holding it in. Refit the pusher (after Lubeing any orings that may be present. 2. Refit movement and dial. Replace case back Repeat step 2 a multitude of times to remove specs of dust you find as soon as you think you have finished Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.