XWORD Posted April 15, 2012 Report Share Posted April 15, 2012 Just received a Cartier Santos 100 Chrono on Friday from Andrew. Everything looked great until today when I noticed I'm now missing a bezel screw from the face of the watch. Probably should have tightened them all when I first received the watch. My bad. With that being said, I don't suppose any member would have a "spare" kicking around? Will PM Andrew with the same request. Also looking to purchase screwdriver set to tighten all screws on this watch, of which there are many. Suggestions on where to get screwdeivers to fit these small screws. Should a person use a locktight product on these to prevent future losses? Thanks for any help. Quote Link to comment Share on other sites More sharing options...
XWORD Posted April 15, 2012 Author Report Share Posted April 15, 2012 Wow I can't believe I just found that stupid little screw on the floor. Still need screwdriver set and reply to silly question about lock tight or suggestions regarding prevention against loosing screws in the future. Thanks all. Quote Link to comment Share on other sites More sharing options...
spooky driver Posted April 15, 2012 Report Share Posted April 15, 2012 wow good find i got a set on bay....good enough for me Quote Link to comment Share on other sites More sharing options...
asciwhite Posted April 15, 2012 Report Share Posted April 15, 2012 +1 on the bay Screwdriver set Quote Link to comment Share on other sites More sharing options...
duke1973 Posted April 15, 2012 Report Share Posted April 15, 2012 And like you said be sure to use a dab of blue loc-tite on the permanent screws to keep them from falling out again in the future. Also make sure to use the correct, tightest fitting screwdriver you have to prevent it from slipping and scratching up the watch. If you use the loc-tite you don't have to really supertighten the screws, just get them snug and the LT will do the rest. Quote Link to comment Share on other sites More sharing options...
XWORD Posted April 16, 2012 Author Report Share Posted April 16, 2012 Thanks guys for taking the time to reply. This helps me out. One more thing, where to get the loc tight blue? Thanks again everybody. Quote Link to comment Share on other sites More sharing options...
XWORD Posted April 16, 2012 Author Report Share Posted April 16, 2012 Duke thanks for the tip on the loctite blue. I'm sure I can get it at any hardware store here in the Great White North. Best regards. Quote Link to comment Share on other sites More sharing options...
maverick86 Posted April 16, 2012 Report Share Posted April 16, 2012 +1 on the bay Screwdriver set Will these fit the hublot 'H' screws or do they need a specific screwdriver? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.