gmtlover Posted October 1, 2012 Report Share Posted October 1, 2012 I've recently purchased a iwc top gun V3. And now I am going to try and improve it's little flaws I try to capture it with a pic. But made with an iphone 5 so not the best possible result here. There is some play between the strap and the case. The hole in the strap is wider than the pin that is holding it onto the case. Can I solve this by putting a wider pin in? And what size would I need in width and length? Thanks guys! Quote Link to comment Share on other sites More sharing options...
concepta Posted October 1, 2012 Report Share Posted October 1, 2012 A thicker springbar might do the trick! The gap is quite normal though! Quote Link to comment Share on other sites More sharing options...
gmtlover Posted October 1, 2012 Author Report Share Posted October 1, 2012 You again ;-) It is getting embarrassing.. Haha The springbars feel like they could break any moment when I try to tighten the strap on my wrist. What length do I need? And what thickness do you recommend? Quote Link to comment Share on other sites More sharing options...
concepta Posted October 1, 2012 Report Share Posted October 1, 2012 You again ;-) It is getting embarrassing.. Haha The springbars feel like they could break any moment when I try to tighten the strap on my wrist. What length do I need? And what thickness do you recommend? You need for 21mm lugs I would suggest at least 2mm thick but you need to check what really fits the lugholes Quote Link to comment Share on other sites More sharing options...
gmtlover Posted October 1, 2012 Author Report Share Posted October 1, 2012 You need for 21mm lugs I would suggest at least 2mm thick but you need to check what really fits the lugholes thanks, will buy a few to try out..! Quote Link to comment Share on other sites More sharing options...
jamesfl Posted October 2, 2012 Report Share Posted October 2, 2012 I like the Seiko Zulu fat springbars. You can get them on ebay. I usually get mine from seller timepiecerepublic. Quote Link to comment Share on other sites More sharing options...
gmtlover Posted October 3, 2012 Author Report Share Posted October 3, 2012 Do they fit this case? Quote Link to comment Share on other sites More sharing options...
jamesfl Posted October 29, 2012 Report Share Posted October 29, 2012 I don't see why they wouldn't. I bought them for my 3717 on leather which also takes 21mm bars. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.