ActionZzZ Posted November 13, 2012 Report Share Posted November 13, 2012 (edited) Guys, I am worried of the timegrapher results on QC pic, in particular the Amplitude what do you think? Edited November 13, 2012 by ActionZzZ Link to comment Share on other sites More sharing options...
kbh Posted November 13, 2012 Report Share Posted November 13, 2012 I'm not an expert but I think the amplitude is high but not out of spec. Time Zone says not over 310 and my manual says not over 360. It will normally be lower in the other positions by up to 45 degrees, as I find the face up to be the highest. Also +6 seconds wouldn't bother me since I have found that that number also often runs less in the face down and crown up/down positions. Most often I would have my watches set to around that anyway. The lift angle I see set at 52.8 when it's normally set at 52 degrees. I'm not sure how that affects the numbers but probably it's minimal. You could ask to have it re-checked at the lift angle of 52. All in all, you're seeing a very short time period in just one position so it's not very meaningful but it's not showing any serious defects to me. Personally, I would take it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now