Where to get a decent 7mm crown?

[mojako]

I recently bought a Josh 5513 with a really large crown...

 

Where can i get an affordable replacement?  One that is not that large.  

 

Is rafflestime a worthy replacement?  Only $26.99 including the tube.  Dont want to spend more than $50 for a gen one.

 

http://www.rafflestime.com/servlet/the-802/Milsub-Crown-for-ETA/Detail'>http://www.rafflestime.com/servlet/the-802/Milsub-Crown-for-ETA/Detail

 

[Robaer]

TC's crown should look ok.

[cjjoyce1]

The crown that came on your 5513 can be modded.  I actually think the replication of the old style 703 coronet on the cartel vintage crowns are pretty decent.  But yes, the crown itself is too tall.  A few of us solved that issue by gripping the crowns stem in a dremel or drill and holding a file to the lower edge as it spins.  you can grind down the height while at the same time put a more correct lower edge bevel on it.  Pretty easy to do - go slow and check your work - and won't cost you anything.  Plus the coronet on the crown is more period correct for your watch than a modern replacement style.

 

Just my 2 cents

[mojako]

That sounds like a good idea!