PVD plating, how to remove

[edgematic1]

I'm working on a new franken project and I would need to get PVD plating removed. Is there anyone who has experience with this?

 

I have found some threads on other forums about Hydrochloric Acid 32% and removing PVD by reversing the electoplating.

 

Anyone who can help me out? Or anyone who has experience in this?

 

Thanks!

[edgematic1]

It worked by using 32% hydrochloric acid and sandpaper in combination with hand work.

[Watchmeister]

Did you have to do the same case refinishing (brushing, polishing, etc.) that you would have to do with bead blasting?

[waterloosmith]

Handy to know as ive got one thats looking shabby

[edgematic1]

I have no idea which refinishing you need to do with bead blasting, I took some pics of the process and will post them up soon. The problem with the bead blasting is that sharp edges etc can be gone after that process so I opted for a chemical reaction.

[edgematic1]

If you do this process, be warned it's a very dangerous product, you need to use gloves that are acid resistant, use glasses and a chemical mask. Also you need to ask around where to dispose of the acid after the work is done etc. Inform you very well before doing it. Also take a look at the case every 15min. as it can damage the case.