PAM360 stopping

[ftt]

I have a PAM360 (H v2) I got from Andrew 1 month ago. The 3rd week I had the watch were 2 instances where the watch was stopped when I woke up and I had to give it a shake for it to start back up. This morning the watch stopped while on my wrist and winding it a couple clicks started it back up, but 5 minutes later it was stopped again (was fully wound). Does this sound like a simple issue like it needs servicing for lubrication or is it likely that I need a new movement? I'm also not sure what to expect in regards to buying from an AD and whether or not to expect them to help. The first 2-3 weeks I had it the watch kept time really well. Thanks.

[Rolexman]

Could be anything. You could take it to your local repair shop (non-branded).

Where are you located in the world? If western Europe send me a PM maybe I can help you.

If you are over on the island of GB you should talk to MD2020.

[Rolexman]

Won't make that mistake again

[ftt]

I'm in the US, I sent an email to SpeedyGWatch to see if he can take a look. Thanks for the input, I'll post what I find out.

[kevshed]

I had a similar issue on a 111.... Turned out to be a loose screw on the ratchet wheel... So I agree, just whip of the back and do a quick check before sending anywhere

[mini167]

i had a similar problem on my 243, wear it over 10hours later, then weak up on the morning, the watch stopped , suspect the auto winding may have trouble , buy manual winging is very good . so i sent it to my TD to fix this.