sputim Posted April 25, 2013 Report Posted April 25, 2013 Today I turned my he valve on my crpo 42mm and suddenly it came off. As much as I now it can be unscrewed but not taken off right? Now it stucks half way screwed in and I have no chance to screw it in tightly anymore.. Any help to fix this since it really bugs me..:/ Cheers
FxrAndy Posted April 25, 2013 Report Posted April 25, 2013 It needs to be held from the inside so that you can tighten it all the way down
ldegeneve Posted April 25, 2013 Report Posted April 25, 2013 Use a pair of pliers to screw it back in.
indywatchguy Posted April 25, 2013 Report Posted April 25, 2013 Relax sput I had the same issue. I wouldn't use pliers anywhere on my watch....might leave a nasty scratch All you have to do is screw the stem out as far as possible. Then place the valve cap on and lightly screw it back onto the stem...its tedious but be patient it will work. If necessary to prevent stem from turning hold it with tweezers. Good luck! 1
sputim Posted April 27, 2013 Author Report Posted April 27, 2013 Thanks indy it worked out! That's the way to go. Cheers
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now