sputim Posted April 25, 2013 Report Share Posted April 25, 2013 Today I turned my he valve on my crpo 42mm and suddenly it came off. As much as I now it can be unscrewed but not taken off right? Now it stucks half way screwed in and I have no chance to screw it in tightly anymore.. Any help to fix this since it really bugs me..:/ Cheers Link to comment Share on other sites More sharing options...
FxrAndy Posted April 25, 2013 Report Share Posted April 25, 2013 It needs to be held from the inside so that you can tighten it all the way down Link to comment Share on other sites More sharing options...
ldegeneve Posted April 25, 2013 Report Share Posted April 25, 2013 Use a pair of pliers to screw it back in. Link to comment Share on other sites More sharing options...
indywatchguy Posted April 25, 2013 Report Share Posted April 25, 2013 Relax sput I had the same issue. I wouldn't use pliers anywhere on my watch....might leave a nasty scratch All you have to do is screw the stem out as far as possible. Then place the valve cap on and lightly screw it back onto the stem...its tedious but be patient it will work. If necessary to prevent stem from turning hold it with tweezers. Good luck! 1 Link to comment Share on other sites More sharing options...
sputim Posted April 27, 2013 Author Report Share Posted April 27, 2013 Thanks indy it worked out! That's the way to go. Cheers Link to comment Share on other sites More sharing options...
indywatchguy Posted April 28, 2013 Report Share Posted April 28, 2013 Awesome! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now