V Posted November 28, 2006 Report Share Posted November 28, 2006 Well I have both my watches near me at the moment after a long exposure to direct and strong sunlight (Yes end of November in Uk is sunny ) Photo and answers later or tomorrow Link to comment Share on other sites More sharing options...
V Posted November 28, 2006 Author Report Share Posted November 28, 2006 WOW... All of you believe that the sandwich is more bright? There are two parts in the equasion.: 1. Sandwich may use more C3 paste 2. Painted though are more closer to the glass. THis is the photo I have taken.. They may look the same but with naked eye there is a small difference... Keep voting Link to comment Share on other sites More sharing options...
premiumdesigners Posted November 28, 2006 Report Share Posted November 28, 2006 i have the painted on my Pam gen and finepic superlume on rep Pam 111h. The painted is much brighter during the day. both charged in the dark look the same tho. Link to comment Share on other sites More sharing options...
V Posted November 29, 2006 Author Report Share Posted November 29, 2006 i have the painted on my Pam gen and finepic superlume on rep Pam 111h. The painted is much brighter during the day. both charged in the dark look the same tho. I agree.. although your comparison may not be so accurate because of the re-lumed Finepics dial (not made by a machine like a gen). Nevertheless this is exactly the result I have seen.. I too believed that the sandwich dial will be brighter but that's not the case. The painted it is not very much brighter but if you look carefully you can understand the difference Link to comment Share on other sites More sharing options...
Watchmeister Posted November 29, 2006 Report Share Posted November 29, 2006 I suspect you are right that the lume closer to the dial will shine slightly brighter. But here is the next question. Which one shines longer? I will guess sandwich as it has more lume but I have no idea. Link to comment Share on other sites More sharing options...
V Posted November 29, 2006 Author Report Share Posted November 29, 2006 I suspect you are right that the lume closer to the dial will shine slightly brighter. But here is the next question. Which one shines longer? I will guess sandwich as it has more lume but I have no idea. Hmmmm.. shinny day again here.. Next scientific test Link to comment Share on other sites More sharing options...
Watchmeister Posted November 29, 2006 Report Share Posted November 29, 2006 Link to comment Share on other sites More sharing options...
mikellem Posted November 29, 2006 Report Share Posted November 29, 2006 Link to comment Share on other sites More sharing options...
V Posted November 29, 2006 Author Report Share Posted November 29, 2006 Tested them and both Sandwich and painted dials have the same lasting lume... Can't say one last longer than the other. (In a completely dark environment - my wardrobe ) Link to comment Share on other sites More sharing options...
PAMman Posted November 29, 2006 Report Share Posted November 29, 2006 At the moment I have only one gen Panerai with Luminor (+ 2 Tritiums) so I can't compare the painted with a sandwich dial. However I have always thought that the luminous material will get less exposure to light at the bottom of the sandwich cut-out, than the painted 'flat' dial in a similar situation. Also, marginally less light may be emitted through the same cut-out. Consider it this way: if the top layer of the sandwich was 100mm thick it would be obvious that less light would enter and exit, to and from the lume, so there must be a decrease on a pro-rata basis that would result in a marginal decrease from a thin top layer. Incidentally, the flat 'painted' dial on the genuine A-G series 44mm Panerai (and current 000 & 005) is also a sandwich with cut-outs for the markers. This will be apparent only when you view the dial through a loup. I had a F series 111 that had the black layer lifting slightly on the inner tight curves of the 2 (of 12) and 3 digits. Also, when photographed with side lighting, some dials display the edges of the top, black layer of the dials. This helps explain the crispness of the edges of the lume on the gen dials. Link to comment Share on other sites More sharing options...
V Posted November 29, 2006 Author Report Share Posted November 29, 2006 At the moment I have only one gen Panerai with Luminor (+ 2 Tritiums) so I can't compare the painted with a sandwich dial. However I have always thought that the luminous material will get less exposure to light at the bottom of the sandwich cut-out, than the painted 'flat' dial in a similar situation. Also, marginally less light may be emitted through the same cut-out. Consider it this way: if the top layer of the sandwich was 100mm thick it would be obvious that less light would enter and exit, to and from the lume, so there must be a decrease on a pro-rata basis that would result in a marginal decrease from a thin top layer. Incidentally, the flat 'painted' dial on the genuine A-G series 44mm Panerai (and current 000 & 005) is also a sandwich with cut-outs for the markers. This will be apparent only when you view the dial through a loup. I had a F series 111 that had the black layer lifting slightly on the inner tight curves of the 2 (of 12) and 3 digits. Also, when photographed with side lighting, some dials display the edges of the top, black layer of the dials. This helps explain the crispness of the edges of the lume on the gen dials. It's always good to listen to the PAM experts Here a photo to show what you mean about the painted dials Link to comment Share on other sites More sharing options...
PAMman Posted November 29, 2006 Report Share Posted November 29, 2006 Beautiful watch Kostas. That photo shows exactly what I meant. The top, black layer is not painted on a flat base but is a thin sandwich layer, which in the case of my (ex) 111 was beginning to lift on the inside of the bottom of the 2 and similarly on the 3. It makes for really crisp edges to the lume that can't be replicated by printing. I suppose that, given the sheer size of the dial and markers this is the only way to get good edges to the luminous material, in a way that isn't critical on smaller dials or dials with smaller expanses of lume. Link to comment Share on other sites More sharing options...
lello Posted December 10, 2006 Report Share Posted December 10, 2006 As I see you guys are very into the lume matter, can I ask you how long should last the glow in totally dark, to be considered good as gen Pams? Link to comment Share on other sites More sharing options...
Watchmeister Posted December 10, 2006 Report Share Posted December 10, 2006 In terms of being legible in a totally black room Gens can be good for 8 hours. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now