jafar Posted September 26, 2013 Report Share Posted September 26, 2013 Hi Not sure if this is a right thread..but also looking for these information in repir&upgrade buy no luck. this time doing some improvements on my REP Avenger skyland..Movement repair...cleaning, polishing..etc. ( I believe that have V2) Guys, can someone tell me how to remove bezel? On GEN simply unscrew little screws across bezel and pull out bezel away from watch body. On my REP there looks to be "faux" screws which can be easily unscrew but with no impact to bezel.... bezel is still on the same place and can't be remeved. any idea how to remove? many thanks in advance Jaro Link to comment Share on other sites More sharing options...
jafar Posted September 28, 2013 Author Report Share Posted September 28, 2013 I don't belive that there is no one experienced.... Link to comment Share on other sites More sharing options...
436NR Posted September 29, 2013 Report Share Posted September 29, 2013 You can pry it off with a razor or a small knife blade. It's not easy but it will come off. Be careful not to cut yourself if using a razor blade. Try searching again... There is a thread talking about removing a bezel. That's how I learned... Sent from my iPhone using Tapatalk - now Free Link to comment Share on other sites More sharing options...
carliv Posted September 29, 2013 Report Share Posted September 29, 2013 Was just going to post about this. Lol. I'm looking so switch my super avenger bezel with a gen diamond one and was wondering how difficult it was and if those screws were all that I had to do to remove it. Any one remove one here? Link to comment Share on other sites More sharing options...
importr Posted October 1, 2013 Report Share Posted October 1, 2013 I switched the bezel on my v2 skyland. The rep bezel comes off very easily using a bergeon remover. The cheap plastic donut type. The gen bezel is not a direct fit. There is a lip on the case chimney which is a different height to the gen, so you will need longer screws and a thicker retaining spring. Or you can just bond the bezel onto the case permanently. Link to comment Share on other sites More sharing options...
jafar Posted October 4, 2013 Author Report Share Posted October 4, 2013 (edited) I have also open thread for this issue on repgeek.. there are some interesting information from more experienced members Shortly...depends on the version: V3 noob can be removed easily....V2..H factory will destroy the bezel.. Edited October 4, 2013 by jafar Link to comment Share on other sites More sharing options...
jafar Posted October 4, 2013 Author Report Share Posted October 4, 2013 I switched the bezel on my v2 skyland. The rep bezel comes off very easily using a bergeon remover. The cheap plastic donut type. The gen bezel is not a direct fit. There is a lip on the case chimney which is a different height to the gen, so you will need longer screws and a thicker retaining spring. Or you can just bond the bezel onto the case permanently. many thanks....you mean this one? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now