aajaxx007 Posted January 14, 2014 Report Share Posted January 14, 2014 Gents, I have a lovely tuxedo GMT that took a hit to the bezel. Ordinarily I would brush it right out with some Sandflex but as you know the 029 has the sort of Explorer type bezel indices. If I brush the dings out will I take the ink inside the indices with it?If so I suppose I could fill them back in...The lovely piece in questionThe scuffs best as I can show em - on the top and bottom if the 23 hour marker Any words of wisdom appreciated. Thanks!Ajax Quote Link to comment Share on other sites More sharing options...
jpz5142 Posted January 14, 2014 Report Share Posted January 14, 2014 I had a similar type of issue on my EXP II and what I did was remove the bezel, dunk it it paint thinner to remove the numbers, brush the bezel and then paint the numbers. The numbers took me a couple tries and in the end I am satisfied with the color better than the original color. It might give you better piece of mind to factor in re-painting the bezel from the start of true project rather than stressing while brushing the bezel in fear of ruining the numbers. Quote Link to comment Share on other sites More sharing options...
aajaxx007 Posted January 14, 2014 Author Report Share Posted January 14, 2014 That sounds like good advice. Perhaps I will leave the scuffs for now. Not ready to tackle a dismantling of this watch just yet... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.