PAM380

[Mvs72]

Can anyone advise how to remove the back off a 380? The big hand has detached itself and is loose inside the face!! Any tips on self repair would be much appreciated!

[astonjenks]

Ideally you need the correct sized PAM caseback remover found on the bay or similar, failing that a rubber type of ball pushed tightly against the caseback and rotate the ball in an anti clockwise direction. Failing that a roll of ducktape rolled up into a ball pushed hard against the caseback and rotated with pressure being applied might do it.

You then need to remove the crown and stem, remove the movement and refit the hand.

 

Hope this helps, pm me if you need more.

Regards

AJ

[Mvs72]

Ideally you need the correct sized PAM caseback remover found on the bay or similar, failing that a rubber type of ball pushed tightly against the caseback and rotate the ball in an anti clockwise direction. Failing that a roll of ducktape rolled up into a ball pushed hard against the caseback and rotated with pressure being applied might do it.

You then need to remove the crown and stem, remove the movement and refit the hand.

 

Hope this helps, pm me if you need more.

Regards

AJ

Thanks so much AJ for the quick reply, I'll have a search for the case back remover first.

Gutted! It's been amazing for two years on my wrist every day I've just come home and looked down to find it fallen off!!

I will definitely PM you for extra coaching!

Thanks again.

M.