Mvs72 Posted May 21, 2014 Report Share Posted May 21, 2014 Can anyone advise how to remove the back off a 380? The big hand has detached itself and is loose inside the face!! Any tips on self repair would be much appreciated! Quote Link to comment Share on other sites More sharing options...
astonjenks Posted May 21, 2014 Report Share Posted May 21, 2014 Ideally you need the correct sized PAM caseback remover found on the bay or similar, failing that a rubber type of ball pushed tightly against the caseback and rotate the ball in an anti clockwise direction. Failing that a roll of ducktape rolled up into a ball pushed hard against the caseback and rotated with pressure being applied might do it. You then need to remove the crown and stem, remove the movement and refit the hand. Hope this helps, pm me if you need more. Regards AJ 1 Quote Link to comment Share on other sites More sharing options...
Mvs72 Posted May 21, 2014 Author Report Share Posted May 21, 2014 Ideally you need the correct sized PAM caseback remover found on the bay or similar, failing that a rubber type of ball pushed tightly against the caseback and rotate the ball in an anti clockwise direction. Failing that a roll of ducktape rolled up into a ball pushed hard against the caseback and rotated with pressure being applied might do it. You then need to remove the crown and stem, remove the movement and refit the hand. Hope this helps, pm me if you need more. Regards AJ Thanks so much AJ for the quick reply, I'll have a search for the case back remover first. Gutted! It's been amazing for two years on my wrist every day I've just come home and looked down to find it fallen off!! I will definitely PM you for extra coaching! Thanks again. M. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.