childishthing Posted May 31, 2014 Report Share Posted May 31, 2014 There are 2 "specs" of dirt, or something underneath the crystal. I'm 100% sure they weren't there the last time I wore the watch. Please advise. Right behind the 2 O'Clock marker against the rehaut, the spec is on the dial/face Right above the 8 O'Clock marker, near the mercedes. It is touching the crystal on the underside Link to comment Share on other sites More sharing options...
Robert Thompson Posted May 31, 2014 Report Share Posted May 31, 2014 This is going to happen, it's a rep. If you are bothered by this I would suggest a new hobby or you will become very frustrated very quickly. Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
mjmj Posted May 31, 2014 Report Share Posted May 31, 2014 If you haven't done so already, you will need to buy some watch tools. Read up on tutorials here on how to remove your movement from case and subsequently rice the dirt. Dirt and dust will always appear and it would be costly to keep sending to watchsmith to remove. I had to learn how to do this and now if I see anything under the crystal , it takes less than 10mins to remove and clean. Good luck 1 Link to comment Share on other sites More sharing options...
childishthing Posted May 31, 2014 Author Report Share Posted May 31, 2014 This is going to happen, it's a rep. If you are bothered by this I would suggest a new hobby or you will become very frustrated very quickly. Sent from my iPad using Tapatalk laaaaaaaaaaaaame If you haven't done so already, you will need to buy some watch tools. Read up on tutorials here on how to remove your movement from case and subsequently rice the dirt. Dirt and dust will always appear and it would be costly to keep sending to watchsmith to remove. I had to learn how to do this and now if I see anything under the crystal , it takes less than 10mins to remove and clean. Good luck thanks! i feel much better now. all i have right now is a spring bar tool, and i was planning on getting a case back removal tool as well... anything else that i NEED for this job? Link to comment Share on other sites More sharing options...
mjmj Posted May 31, 2014 Report Share Posted May 31, 2014 Some good screwdrivers, tweezers, loupe, blower, Rodico , good polishing cloth to name a few 1 Link to comment Share on other sites More sharing options...
H3RACL3S Posted June 1, 2014 Report Share Posted June 1, 2014 Almost the same thing happened to me ! I had some dust and some water vapor/grease on the inside of the crystal it was an old rep so i bought a rubber ball, tweeres and i tried ! Well it worked really well i was quite stressed but the key is to take your time and it will be alright ! Rodico is good but i haven't bought this yet and for the blower i used a hairdryer it worked for me ! Good luck ! Tempus fugit, utere. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now