Lost incabloc balance bridge jewel A2836-2 - Help...

[GenTLe]

Ok, so during reassemble of this movement: http://www.rwgforum.net/topic/172196-my-first-movement-teardown/ I disassembled the balance bridge incabloc to oil it (note: the balance bridge in NOT the one in the picture of that thread, I used another balance assembly with a standard NOT novodiac incabloc).

As perfect newbie I let the 2 parts (top flat jewel and perforated one with metal ring) around the movement I was assembling and so, while I was putting back the "perforated one" I have somehow taken with my sleeve the top flat jewel and... Well "puff", lost

 

This one is the lost part (on the top there is a syringe needle for size comparison):

 

Part of this bridge:

 

On ETA charts it is declared in this way, and that "VAR" means that there are different type of it which goes in pair with different bridges...

 

 

Now... On CousinsUK the 3024 part for ETA 2836-2 is declared this way:

Inca 09.164.22.312
Cousins ref: INCA0916422312

(and it's part of a HUGE lost of incabloc https://www.cousinsuk.com/catalog/4/0/1967/3548.aspx?code=INCA0916422312#select )

 

Can anyone tell me if this is the correct part? Do you have experience in replacing these part of a Asian verion od the ETA 2836-2?

 

Even better: out of this list of Inca end stones, do you know which one I should take (saving good money)? https://www.cousinsuk.com/catalog/watch-parts/inca/inca-end-stones

 

@Rolexman @SSTEEL, any advice?

 

Thanks A LOT, GenTLe

Edited August 20, 2014 by GenTLe

[misiekped]

Pm me with your addy

I will send you few

[GenTLe]

Uhm... Found this. The end stone should be the 122.11, isn't it?

[GenTLe]

Pm me with your addy

I will send you few

 

Mate, you're very very gentle, and I thanks you a lot. But i'm in Italy, and getting things from USA (you're from New York, aren't you?) it's always a PITA because of the customs...

[misiekped]

Will put in regular mail, no customs for