themannier Posted January 29, 2016 Report Share Posted January 29, 2016 Hi everyone ! I should buy shortly a brand new gen ETA 6497-1 for a radiomir ceramic body i already have... This gen ETA 6497-1 beats @ 18000/ H . The most part of our rep ETA/UNITAS(6497-2 clones) are 21600/H and the gen PANERAI OP2 also, which is based on the 6497-2. I won't buy a gen ETA 6497-2, it's too expensive... You can get it for around 500 euros on Ebay. The 6497-1 is around 200 euros !! I have the following question: 1) I install a KW PAM292 dial with small second at 9, and i wonder if i will notice that the second hand is less smooth with the 18000bph. 2)I install a KW PAM643 Hobnail dial, without second hand...But in that case, i will have to cut the second pivot because there is no hole for it on the dial. I don't know what to do; please give me your opinion Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.