goodytwoshoes Posted June 29, 2016 Report Share Posted June 29, 2016 Hi rep enthusiasts, After researching on various forums for 3 months, Im convinced of the Noob v6s build. However, the thing holding me back from purchasing is the difference in mechanism reliability. Many have explicitly highlighted that the Sa3135 is more prone to have problems and issues (weak stem etc) versus the A2836. My initial contact with approved TD InTime revealed that he hasnt in fact gotten much complaints from customers on the sa3135 till date. Any thoughts on this? Close to having my firstt sub rep.! Link to comment Share on other sites More sharing options...
irolexu Posted June 29, 2016 Report Share Posted June 29, 2016 Despite what your TD says I would go with a 2836 version unless you're planning on installing gen parts and don't mind the risk factor with the sa3135. A 2836 is a very reliable option and anyone can fix the ETA easily but not so much with a sa3135 Link to comment Share on other sites More sharing options...
goodytwoshoes Posted June 29, 2016 Author Report Share Posted June 29, 2016 Hi irolexu Thanks for your input. And since Subs are covered on the back casing. TD has mentioned that the watch build is similar for both "models" and the difference is just the mechanism. I guess, we'll just have to give it a shot! Joining the rep community soon... Link to comment Share on other sites More sharing options...
hologramet Posted June 29, 2016 Report Share Posted June 29, 2016 I'll add in on what @iroleu said. Dont buy the SA3135 unless you want performance that is both worse and prone to die. Only time I would buy the SA3135 would be for a Yuki 3135 (with genuine parts) and e.g. genuine Mercedes-hands and genuine dial. /V Link to comment Share on other sites More sharing options...
goodytwoshoes Posted June 30, 2016 Author Report Share Posted June 30, 2016 Hi Hologramet Appreciate your advice as well. Just placed my order for a 2016 Noob Black Ceramic Sub V6s! Will be posting the QC pics once I receive from Ryan, for the extra pair of trained seasoned eyes on QC. Just curious, any particular section of the watch do I have to pay attention to/ ask for more detailed pics? Link to comment Share on other sites More sharing options...
hologramet Posted July 2, 2016 Report Share Posted July 2, 2016 Start with these two: http://rwg.cc/topic/184333-advice-intimeco-watches-qc-dept-check-on-my-new-rolex-submariner-smurf http://rwg.cc/topic/184460-new-noob-v6s-submariner-lv-hulk-question They cover almost everything you need to know! holo Link to comment Share on other sites More sharing options...
ChrisBlank Posted July 2, 2016 Report Share Posted July 2, 2016 @goodytwoshoes Has he contacted you after paying him yet? I ordered 2 watches from him 3 weeks ago and he keeps telling me that he hasn't recieved my payment. Link to comment Share on other sites More sharing options...
goodytwoshoes Posted July 3, 2016 Author Report Share Posted July 3, 2016 @ChrisBlank Hi Chris I've been rather busy this weekend settling the purchase of my car. Havent got the opportunity to place the order yet. Do you have a payment confirmation from your bank? @hologramet Hi Holo Yeah I've looked through these two and have a list of the following to look out for:- Rehaut alignment Pearl positioning Date "centered-ness" Sel-Filment Bezel engrave Dial words and colour tonality Crown protector As mentioned earlier, I will post up the QC pics (when i finalize the order next week) for your expert opinions, feel free to comment. Link to comment Share on other sites More sharing options...
ChrisBlank Posted July 5, 2016 Report Share Posted July 5, 2016 @goodytwoshoes yes I have payment confirmation from my bank. Link to comment Share on other sites More sharing options...
hologramet Posted July 6, 2016 Report Share Posted July 6, 2016 On 2016-07-03 at 2:05 PM, goodytwoshoes said: @ChrisBlank Hi Chris I've been rather busy this weekend settling the purchase of my car. Havent got the opportunity to place the order yet. Do you have a payment confirmation from your bank? @hologramet Hi Holo Yeah I've looked through these two and have a list of the following to look out for:- Rehaut alignment Pearl positioning Date "centered-ness" Sel-Filment Bezel engrave Dial words and colour tonality Crown protector As mentioned earlier, I will post up the QC pics (when i finalize the order next week) for your expert opinions, feel free to comment. 1) Rehaut alignment, correct 2) Pearl and insert, that it is the correct v6s-type and not earlier (this can be judged by pearl, depth and look of insert numbers) 3) SEL-fitment + clasp. That it is the correct v6s. 4) Crown-guards, don't think there is anything to look for there though. 5) Dial print, same there... It is what it is. If you want better, have a watchmaker relume a BP Miyota 116610LN-dial (and also the hands) with Superluminova BGW9. Link to comment Share on other sites More sharing options...
ChrisBlank Posted July 7, 2016 Report Share Posted July 7, 2016 Got a confirmed payment from Ryan finally. This is my noob 2836 V6. The date was a little too high, but Ryan's team is doing a great job and is replacing it with one that's centered. I'm looking good forward to putting this one on the wrist. Link to comment Share on other sites More sharing options...
goodytwoshoes Posted July 8, 2016 Author Report Share Posted July 8, 2016 @ChrisBlank What a coincidence, I've just confirmed my order and did a TT for a Black noob V6S sub as well. I certainly hope he dont get our orders mixed up! or for that matter, swop our watches! Great looking watch by the way, I'll be posting my QC pics once he can confirm the order. Link to comment Share on other sites More sharing options...
goodytwoshoes Posted July 17, 2016 Author Report Share Posted July 17, 2016 Hi guys QC pics are up here. In my opinion, the the gap between the case and the bracelet is too wide and "misfitted". OK parts seem to be (1) Rehaut alignment (2) Pearl positioning (3) Datewheel "centered-ness" (4) Dial words. Anyone keen to provide opinion and extra help on this? Guys, what do you think? @hologramet @ChrisBlank Thanks! Link to comment Share on other sites More sharing options...
ChrisBlank Posted July 18, 2016 Report Share Posted July 18, 2016 @goodytwoshoes, I had a similar case recently in which I actually accepted the watch as I figured these ultra high res close ups would highlight actual non-problems. Upon arrival the product actually looked 85% better than the close up QC shots. However, the limit of tolerance is to each their own. So I guess it depends on what you are or are not willing to accept. I actually brought this watch to the office today, and it was a hit! I am luck to work with many replica enthusiasts in my office. Link to comment Share on other sites More sharing options...
goodytwoshoes Posted July 18, 2016 Author Report Share Posted July 18, 2016 @ChrisBlank Indeed. It looks perfect from another angle. Its on its way to my wrist. 1 Link to comment Share on other sites More sharing options...
ChrisBlank Posted July 18, 2016 Report Share Posted July 18, 2016 That's a good looking watch! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now