Torques Posted January 6, 2007 Report Share Posted January 6, 2007 I just realized that my crown barely screws in by a thread or pops out. It is a gmt master II from one of the scam sites. The edge of the crown is hitting the inside of the crown guards. It doesn't even fit, geez, what junk. I have a dremmel so my question is how hard is it shape the inside of the crown guard as to allow the stem/crown to seat properly? Thanks in advance for any help. Quote Link to comment Share on other sites More sharing options...
Everythingape Posted January 6, 2007 Report Share Posted January 6, 2007 Why don't you try a LITTLE bit, and see if it fits.. If not, do a little more.. etc etc.. Quote Link to comment Share on other sites More sharing options...
gioarmani Posted January 6, 2007 Report Share Posted January 6, 2007 Which site? How long since you purchased it? I bought a $900 piece of [censored] from bestswisswatches.com before I found this board and they (surprisingly) fully refunded my card for a defective watch a week later. Can't hurt to try... Quote Link to comment Share on other sites More sharing options...
Torques Posted January 7, 2007 Author Report Share Posted January 7, 2007 Which site? How long since you purchased it? I bought a $900 piece of [censored] from bestswisswatches.com before I found this board and they (surprisingly) fully refunded my card for a defective watch a week later. Can't hurt to try... Yeah right. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.