Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Recommended Posts

Posted

With a spare 1675 BP (Cartel) Dial I had laying around, I decided to figure out how to upgrade it with a better lume and texture (and used it to practice soldering dial feet). 

 

My first step was to apply several layers of matte spray to the dial while it had the dial markers still on. I purposely did this so the matte lacquer would create a natural border for the next steps. For the spray, I use Testors brand Matte Spray Lacquer. 

ulyJzQq.jpg

https://i.imgur.com/ulyJzQq.jpg

qIekEWr.jpg

https://i.imgur.com/qIekEWr.jpg

 

Next, I pull the dial marker s off. It’s a simply task - turn the dial over and push the markers out by their legs with a pin pusher or other small pin tool. As you can see, the lacquer spray created a natural edge to guide repainting the indexes. 

99t81bH.jpg

https://i.imgur.com/99t81bH.jpg

ajO6zjR.jpg

https://i.imgur.com/ajO6zjR.jpg

 

I then used a Testers Flat White Epoxy paint to repaint the indexes. I used my thin oiler to apply the paint as I would lume. I painted the indexes rather than just luming because the white provides a reflective surface for the lume - basically, the lume is brighter and looks better one a white backdrop. Next time, I would consider cutting the thickness of the paint to make it a bit more “watery” and thin. I think it would help get the edges a bit smoother. 

axfIrjU.jpg

https://i.imgur.com/axfIrjU.jpg

H8AeQVx.jpg

https://i.imgur.com/H8AeQVx.jpg

yjDnemq.jpg

https://i.imgur.com/yjDnemq.jpg

 

Once dried (overnight), I applied a yellow lume, thinly applied as to not interfere with the GMT hand. I also relumed some left over hands to match since I had the lume out anyways. And finally, a few more coats of spray lacquer for good measure. 

 

Looks pretty decent and good practice - now it just needs a home. 

 

Thanks for looking! 

  • 2 weeks later...
Posted

Took my own advice and redid the lume and indexes. Re-hand painted the markers with a thinner white paint (50% mineral spirits) and relumed. The lume applied much nicer with a better, thinner, more even plot. 

zn0aq.jpg


znko6.jpg

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up