HauteHippie Posted January 26, 2007 Report Share Posted January 26, 2007 A few people have asked me about this and I don't remember who, thus the post.... I've found VCO endlink screw replacements (the screws that attach the endlinks to the underside of the case). That's the good news. They're part of a $22.40 (plus shipping) OFrei screw assortment. That's the bad news. OFrei part number CS-639MS. The screws that work are 1.5H 1.2x2.0 and the assortment comes with 10 of them. It would actually be ideal if they were 2.1 or 2.2mm, but these seem to be long enough. Don't forget the loctite! Quote Link to comment Share on other sites More sharing options...
Craytonic Posted January 26, 2007 Report Share Posted January 26, 2007 Thanks a million! I really needed these. I just placed an order for these but will not need the full ten; if someone wants to split costs please let me know. Quote Link to comment Share on other sites More sharing options...
flavor flav Posted January 27, 2007 Report Share Posted January 27, 2007 of all the bracelet mods i've done on the 1:1 VCO, 9 out of 10 have bad endlink screws. they are actually too small and will strip easily! the good news is that the screws strip, not the endlink threads! thanks cheiftang for finding these. now we can get your watch totally dialed in. Quote Link to comment Share on other sites More sharing options...
rbj69 Posted January 27, 2007 Report Share Posted January 27, 2007 i used teh screws that u get in a eyeglass kit from wall mart u have to mill them down a bit but they fit snug and secure , the cost is .98 cents i installed them two years ago i believe and they still work fine but mine is the versin with the flip lock buckle so they may not work on the newer versions just trying to help joe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.