the playful eyes Posted March 10, 2007 Report Share Posted March 10, 2007 I can't find the stem release button on my 861 that is present on the ETA 2824 and other eta variants. someone help? thanks! Link to comment Share on other sites More sharing options...
RWG Technical Posted March 10, 2007 Report Share Posted March 10, 2007 It's not a button, it's a screw next to the stem center line, just in from the edge of the movement. Same procedure with any screw down set lever to get it to release, like the 6497 has... RG Link to comment Share on other sites More sharing options...
the playful eyes Posted March 10, 2007 Author Report Share Posted March 10, 2007 Hi The Zigmeister, thanks! how do I remove the dial and how should I install the tiny sub dial hands? I noticed that the diameter of the bic pen ink tube is much wider than the tiny sub dial hands. THnanks! It's not a button, it's a screw next to the stem center line, just in from the edge of the movement. Same procedure with any screw down set lever to get it to release, like the 6497 has... RG Link to comment Share on other sites More sharing options...
RWG Technical Posted March 11, 2007 Report Share Posted March 11, 2007 Hi Ziggy, thanks! how do I remove the dial and how should I install the tiny sub dial hands? I noticed that the diameter of the bic pen ink tube is much wider than the tiny sub dial hands. THnanks! First off, ditch the bic pen, and buy a Bergeron hand installer tool...less than $20. Get the one with the RED and GREY tips, it works great. The dial is most likely held down by screws on the side of the movement, find them, loosen them and the dial should come off. Proper tooling is essential when doing this, especially hand install and removal. RG Link to comment Share on other sites More sharing options...
longshot Posted March 11, 2007 Report Share Posted March 11, 2007 Proper tooling is essential when doing this, especially hand install and removal. RG decent vision and great eye hand coordination and a lot of knowledge would probably be a big help too that's why i'm never gonna try any of this stuff! Link to comment Share on other sites More sharing options...
RWG Technical Posted March 11, 2007 Report Share Posted March 11, 2007 decent vision and great eye hand coordination and a lot of knowledge would probably be a big help too that's why i'm never gonna try any of this stuff! Agree...there is always a fine line between asking how to do a particular job, and realizing that if you have no idea how to do the job in the first place, maybe, just maybe, your could be in over your head... Proper basic tools, loupe, tweezers, hand removal and installation, dust blower, screwdrivers, etc, are essential and need for even the most mundane tasks, unless your FlipLockBuckle, then just grab the hockey puck from the kids, and your a watchmaker! RG Link to comment Share on other sites More sharing options...
the playful eyes Posted March 12, 2007 Author Report Share Posted March 12, 2007 LOL. Thanks for the advices! It's just so darn exciting to tackle a job I have never done before. Agree...there is always a fine line between asking how to do a particular job, and realizing that if you have no idea how to do the job in the first place, maybe, just maybe, your could be in over your head... Proper basic tools, loupe, tweezers, hand removal and installation, dust blower, screwdrivers, etc, are essential and need for even the most mundane tasks, unless your FlipLockBuckle, then just grab the hockey puck from the kids, and your a watchmaker! RG Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now